STjh two-glove flexible powder dispensing isolator with a continuous-liner discharge

STJH-POWDER-DISPENSING-ISOLATOR-2G-CL300

Powder Dispensing Isolator 2-Glove with 300 mm Liner

A compact two-glove powder isolator with controlled negative pressure and a 300 mm continuous-liner discharge for contained bag-out.

Two-glove compact enclosure
300 mm liner discharge
Three H14 HEPA filters

طلب عرض أسعار تصفح المنتجات

مقدمة المنتج

This shortest dispensing enclosure supports one focused weighing or sampling operation. A 300 mm continuous-liner port provides a contained waste or product exit, while three H14 HEPA stages and controlled exhaust maintain the negative-pressure flexible-wall working volume.

الخصائص الرئيسية

Bench-scale footprint

Two glove positions concentrate containment around a balance and essential dispensing tools.

Contained bag-out

The circular liner port supports sequential sealed packages without opening the main film enclosure.

Controlled inward pressure

The exhaust module regulates negative pressure during normal powder manipulation.

المعلمات الفنية

Glove Ports	2
Enclosure Type	Flexible-wall benchtop isolator
Liner Port	300 mm diameter
Filtration	Three H14 HEPA filters
Pressure Mode	Controlled negative pressure
Pressure Control	Extract-fan regulation
Gas Compatibility	Air; nitrogen option with suitable supply
Discharge Method	Continuous-liner contained bag-out
Primary Duty	Laboratory weighing and dispensing
التخصيص	Glove spacing, liner connection, balance interface, gas supply and exhaust controls can be configured for the powder process.

Applications

Laboratory-scale HPAPI weighing, potent-powder sampling, small formulation trials and contained transfer into sealed liner bags.

Solutions for Your Application

A rigid production isolator is oversized for occasional analytical weighing.Use the two-glove flexible enclosure around one balance and a defined small-batch task.

Removing waste bags could open the powder boundary.Use the 300 mm continuous liner to form and seal successive bag-out sections.

الخيارات المتاحة

Balance integration, air or nitrogen service, push-push filter housings, liner support and pressure-control module may be selected.

Planning a Powder Dispensing Isolator 2-Glove with 300 mm Liner specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا