STJH-NUCLEAR-HEPA-AG1-STANDARD

Nuclear-Grade HEPA Filter AG-1 Standard-Flow

A conventional-flow nuclear HEPA cell built around qualified microglass, a heavy 304 stainless box and protected faces.

Minimum 99.97% at 0.3 micron
14-gauge 304 stainless frame
Protected conventional-flow pack

مقدمة المنتج

This model follows the conventional separator-style nuclear HEPA arrangement: qualified microglass is bonded into a 14-gauge Type 304 stainless enclosure and protected by stainless faceguards. A gasket face suits mechanically clamped filter banks, while the standard-flow pack favors established ventilation layouts rather than the 2000 cfm V-bank retrofit. Exact AG-1 size designation and rated airflow must be chosen from the receiving bank schedule.

الخصائص الرئيسية

Nuclear-duty enclosure

Heavy stainless framing and guards support controlled transport, storage and handling in demanding facility maintenance programs.

Qualified media path

The microglass sheet and assembled cell construction are selected for the nuclear ventilation requirements associated with ASME AG-1 service.

Conventional rack fit

A gasketed face integrates with established clamping frames when the exact size, location and compression allowance match.

المعلمات الفنية

Minimum Efficiency	99.97% at 0.3 micron
Filter Media	ASME AG-1 qualified microglass
Frame Material	14-gauge Type 304 stainless steel
Faceguards	22-gauge Type 304 stainless steel on both faces
Seal Type	Gasket seal
Media-to-Frame Sealant	Phosphorus-free polyurethane
Maximum Continuous Temperature	121 C
Moisture Capability	Up to 99% relative humidity
Flow Configuration	Conventional separator-style standard flow
التخصيص	متوفر على أساس التطبيق المقصود وبيئة التشغيل.

Applications

Specified for nuclear power, DOE-type or defense containment ventilation banks designed around conventional-flow AG-1 filters. Procurement should lock the exact AG-1 size, airflow, seal face and packaging controls to the facility's approved filter schedule.

Solutions for Your Application

A nominal 24-inch cell is ordered without its AG-1 size designation or airflow capacity.Use the bank schedule to state the exact height, width, depth, rated flow and maximum initial resistance rather than relying on nominal face size.

The filter pack or faceguard is damaged during site handling.Keep the cell in its protective crate until the controlled installation point and lift only by the stainless frame.

الخيارات المتاحة

Specify AG-1 size, exact dimensions, rated airflow, upstream or downstream gasket location, faceguard arrangement and controlled packaging needs.

Planning a Nuclear-Grade HEPA Filter AG-1 Standard-Flow specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا