STJH-MOTORIZED-SHUT-OFF-DAMPER-DN100-24V-5NM

Motorized Shut-Off Damper DN100 Class 4 24 V 5 Nm

Remote on-off isolation for a compact circular ventilation branch.

Direct shaft drive keeps the compact assembly straightforward.
The gasketed blade seals the circular perimeter at shutoff.

مقدمة المنتج

A sealed disc sits inside the small galvanized cylindrical casing. Its shaft connects to a mounted low-voltage actuator, allowing a remote command to move the blade between open and closed positions without a separate linkage frame.

الخصائص الرئيسية

Direct shaft drive keeps the compact assembly straightforward.
The gasketed blade seals the circular perimeter at shutoff.

المعلمات الفنية

Nominal Diameter	100 mm
Casing	Galvanized steel
Blade Type	Single circular disc
Blade Gasket	EPDM
Closed-Blade Tightness	EN 1751 Class 4 configuration
Minimum Required Torque	4 Nm
Actuator Torque	5 Nm
Power Supply	24 V AC/DC
Control	On-off
التخصيص	Available for the branch connection and control installation.

Applications

Small laboratory supply branches
Remote isolation of compact extract ducts

Solutions for Your Application

The branch is above an inaccessible ceiling.

A powered shaft allows opening and closure from the ventilation control circuit.

The motor must overcome the sealing disc resistance.

The selected 5 Nm actuator exceeds the documented 4 Nm minimum for this diameter band.

الخيارات المتاحة

Actuator mounting platform
Compatible position indication
Circular connection details

Planning a Motorized Shut-Off Damper DN100 Class 4 24 V 5 Nm specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا