موردك الموحد لمعدات الغرف النظيفة وأساسيات المرافق العقليةدعم المشاريع الدولية
Open mobile navigationClose mobile navigation
الرئيسية / المنتجات / Cleanroom HVAC Systems / Hot-Water Heating Coil Three-Row 1/2-Inch
STJH-HOT-WATER-HEATING-COIL-3ROW-12IN

Hot-Water Heating Coil Three-Row 1/2-Inch

A medium-depth half-inch-tube coil balancing water flow, heat-transfer area and air-side resistance.
  • Three-row heat-transfer depth
  • 1/2 in copper tubes
  • 0.017 in standard tube wall
طلب عرض أسعار تصفح المنتجات

مقدمة المنتج

The three-row core increases heat-transfer depth beyond the compact two-row model and uses 1/2 in tubes with a 0.017 in standard wall. Larger tubes support more water flow and lower circuit velocity for a given duty. This version is intended for medium AHU heating loads where a four-row large-tube coil would add unnecessary casing depth and air resistance.

الخصائص الرئيسية

Balanced core depth

Three rows add surface area without the full footprint of a high-output four-row assembly.

Moderate water capacity

Half-inch tubing supports practical water flow and circuit layouts for central AHUs.

Aluminum fin surface

Closely bonded fins transfer tube heat to the clean supply airstream.

المعلمات الفنية

Tube Rows3
Tube Outside Diameter1/2 in
Standard Tube Wall0.017 in
Tube MaterialCopper
Fin MaterialAluminum
CasingGalvanized or stainless by selection
FluidHot water
CircuitingRated to required water flow
Primary DutyMedium AHU heating
التخصيصمتوفر على أساس التطبيق المقصود وبيئة التشغيل.

Applications

For pharmaceutical, electronics and controlled-production AHUs requiring medium hot-water heating capacity.

Solutions for Your Application

Uneven water distribution leaves part of the three-row face cold.Select header and circuit arrangement for balanced velocity and vent the coil at its installed orientation.
Fin density raises air pressure drop beyond the supply fan allowance.Rate the coil at the actual face velocity and choose fin spacing that balances heat output with fan energy.

الخيارات المتاحة

Specify face dimensions, tube wall, fin spacing, casing alloy, circuiting, connections, coating and drain or vent fittings.

Planning a Hot-Water Heating Coil Three-Row 1/2-Inch specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا
E البريد الإلكتروني لنا WhatsApp WeChat

الرئيسية

المنتجات

الأخبار

من نحن

اتصل بنا