موردك الموحد لمعدات الغرف النظيفة وأساسيات المرافق العقليةدعم المشاريع الدولية
Open mobile navigationClose mobile navigation
الرئيسية / المنتجات / Cleanroom HVAC Systems / Fresh Air Handling Unit 1463 × 557 mm
STJH-FRESH-AIR-HANDLING-UNIT-1463X557

Fresh Air Handling Unit 1463 × 557 mm

A 55 kg low-profile single-flow fresh-air unit measuring 1463 x 557 x 321 mm for small laboratories and clean support rooms.
  • 1463 x 557 x 321 mm cabinet
  • 55 kg equipment mass
  • 200 mm supply connection
طلب عرض أسعار تصفح المنتجات

مقدمة المنتج

This compact fresh-air cabinet uses a shallow 321 mm profile and a 200 mm duct connection, making it suitable where plant depth or support capacity is limited. The single-flow supply path conditions and filters outdoor air without adding an extract-air passage to the casing.

الخصائص الرئيسية

Shallow installation profile

The 321 mm cabinet depth helps the unit fit above service areas or within narrow mechanical zones.

Dedicated supply path

A single-flow arrangement keeps the cabinet focused on treating incoming outdoor air for a small served zone.

Lightest selected chassis

The 55 kg equipment mass reduces support demand compared with the wider members of the family.

المعلمات الفنية

Cabinet Dimensions1463 x 557 x 321 mm
Duct Connection200 mm
Equipment Weight55 kg
Air PathSingle-flow outdoor-air supply
Fan TypeIntegrated direct-drive supply fan
FiltrationSupply-air filter configuration as selected
Heating OptionHydronic or electric duty according to selection
ControlsIntegrated fan and temperature control capability
InstallationLow-profile indoor mounting
التخصيصFilter grade, heating arrangement and connections can be configured for the intended application and operating environment.

Applications

Small laboratories, clean support rooms, preparation spaces and controlled offices that need a dedicated filtered outdoor-air supply.

Solutions for Your Application

The mechanical void has very little available cabinet depth.Use the 321 mm low-profile unit and preserve a service opening along its access face.
Adding a full supply-and-extract unit would duplicate an existing exhaust system.The single-flow cabinet treats only the replacement outdoor air required by the room.

الخيارات المتاحة

Filter grade, electric or water heating, frost protection, duct connection accessories, control sensors and service-side orientation can be selected.

Planning a Fresh Air Handling Unit 1463 × 557 mm specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا
E البريد الإلكتروني لنا WhatsApp WeChat

الرئيسية

المنتجات

الأخبار

من نحن

اتصل بنا