موردك الموحد لمعدات الغرف النظيفة وأساسيات المرافق العقليةدعم المشاريع الدولية
Open mobile navigationClose mobile navigation
الرئيسية / المنتجات / Cleanroom HVAC Systems / Finned-Tubular Electric Air Heater 15 kW Fan-Forced
STJH-FINNED-TUBULAR-ELECTRIC-AIR-HEATER-15KW

Finned-Tubular Electric Air Heater 15 kW Fan-Forced

A 15 kW three-phase fan-forced heater drawing 20 A with a 1/4 hp fan and approximately 38 F discharge-air rise.
  • 15 kW output
  • 20 A at 480 V three phase
  • Approximately 38 F temperature rise
طلب عرض أسعار تصفح المنتجات

مقدمة المنتج

The 15 kW assembly increases element capacity fivefold over the small heater while retaining a 1/4 hp fan. Its published 20 A total current and approximate 38 F air-temperature rise fit medium plant rooms and process-support spaces.

الخصائص الرئيسية

Medium room heating

The element bank supplies enough output for larger mechanical and support areas than the 3 kW model.

Controlled fan discharge

The matched fan distributes heated air rather than concentrating heat near the cabinet.

Documented electrical load

The 20 A total current provides a clear basis for feeder and protective-device coordination.

المعلمات الفنية

Heating Capacity15 kW
Power Supply480 V, three phase
Total Current20 A
Fan Motor1/4 hp
Approximate Air Rise38 F / 21 C
Element ConstructionStainless finned tubular
Air DeliveryIntegral fan-forced
ControlsThermostatic or remote control options
InstallationIndoor plant and support space
التخصيصMounting, thermostat and electrical control package can be configured for the intended application and operating environment.

Applications

Medium clean plant rooms, process-support heating, pharmaceutical utilities and mechanical equipment spaces.

Solutions for Your Application

The 3 kW heater cannot maintain the larger utility room during winter.Use the 15 kW assembly after calculating envelope and ventilation heat loss.
The higher electrical load requires coordinated protection and isolation.Size the 480 V feeder, disconnect and overcurrent protection around the published current and final controls.

الخيارات المتاحة

Thermostat, remote enable, disconnect, control transformer, fan delay, mounting bracket and coated enclosure are available.

Planning a Finned-Tubular Electric Air Heater 15 kW Fan-Forced specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا
E البريد الإلكتروني لنا WhatsApp WeChat

الرئيسية

المنتجات

الأخبار

من نحن

اتصل بنا