English
البرتغالية
الإسبانية
اللغة الملاوية
الإندونيسية
الألمانية
اللغة التركية
اللغة الفيتنامية
الفرنسية
الروسية
العربيةالحالي
التايلاندية
اليابانية
الكورية
معدات إزالة التلوث للموظفين والمواد
محطة غسيل اليدين والجافة والتطهير المتكاملة
A single stainless steel station that presents touchless hand washing, drying and sanitizing in a defined entry sequence.
- Three-stage hand hygiene route
- Touchless wash controls
- Enclosed drying module
- Separated wet and sanitizer circuits
مقدمة المنتج
The Integrated Hand Wash, Dry and Sanitizing Station places the hand-hygiene steps in one linear cabinet. Touchless soap and water outlets serve the wash stage, a drying module removes residual moisture, and enclosed hand ports provide the selected sanitizer at the final stage. The wet zone, air-drying or paper-drying section and solution reservoir areas are separated within the unit to make routine service more orderly.
الخصائص الرئيسية
Touchless soap and water outlets reduce the need for users to touch wash controls.
A dedicated drying module can be configured for filtered air or paper towels.
Separate tubing and service compartments keep wash and sanitizer supplies apart.
The final module can provide a completion output to compatible entry equipment.
حلول للتطبيق الخاص بك
Separate wash, dry and sanitizer units can create unclear traffic flow and make it easy for users to miss a stage.
Personnel move from rinsing to the entrance with wet hands.The central drying stage is physically positioned between wash and sanitizing modules.
Unlinked devices create queues and crossing movement in a small airlock.A single linear cabinet provides one clearly ordered hygiene route.
Wash and sanitizer supplies are confused during refilling.Separated service compartments and fluid circuits identify each supply route.
A connected entrance needs to know whether the station sequence has finished.The control arrangement can deliver a completion output after the configured stages.
تطبيقات نموذجية
Food and beverage clean productionPharmaceutical personnel entryMedical manufacturing hygiene roomsCosmetic filling facilitiesBiotechnology changing suites
المعلمات الفنية
The number of lanes, drying method and module order can be matched to throughput and the planned hygiene sequence.
| المواد الأساسية | SUS304 cabinet with stainless wash basin and enclosed drying and sanitizing modules |
|---|---|
| سمك اللوحة | 1.2–1.5 mm stainless steel enclosure panels |
| العرض الفعال | 600–1000 mm operator working width |
| الحد الأقصى الطول | 1800–2800 mm overall station length |
| الصلب يواجه سمك | 1.2–1.5 mm SUS304 |
| الكثافة الأساسية | 7900-8000/m³ للفولاذ المقاوم للصدأ |
| الموصلية الحرارية | 14-16 W/(m · K) للفولاذ المقاوم للصدأ |
| إنهاء السطح | Brushed SUS304 with seamless basin and enclosed drying hand ports |
| نوع المشترك | Continuously welded wet-zone cabinet with gasketed utility service panels |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Filtered-air or paper-towel dryingSingle or two-lane layoutHeated-water supplyCompletion relay for connected equipment
Planning a Integrated Hand Wash, Dry and Sanitizing Station specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
