English
البرتغالية
الإسبانية
اللغة الملاوية
الإندونيسية
الألمانية
اللغة التركية
اللغة الفيتنامية
الفرنسية
الروسية
العربيةالحالي
التايلاندية
اليابانية
الكورية
مرشحات الهواء والترشيح الكيميائي
فلتر HEPA عالي السعة
A deep-pleat HEPA filter with a large glass-microfibre media pack designed for long loading intervals in cleanroom supply or exhaust air systems.
- حزمة وسائط عميقة الطيات
- High Dust-Holding Capacity
- Rigid Metal Frame
- Long Service Interval
مقدمة المنتج
The high-capacity HEPA filter uses a deep accordion-folded glass-microfibre pack separated by corrugated aluminium foils. The separators preserve open flow channels through the full filter depth and allow a greater media quantity than a shallow cleanroom panel. The pack is bonded continuously into a galvanized-steel or stainless-steel frame with polyurethane sealant. This construction suits central air handlers and containment housings where particulate loading, robust handling and long replacement intervals are more important than an ultra-shallow profile.
الخصائص الرئيسية
Corrugated aluminium separators keep adjacent pleats apart and guide air evenly through the filter depth.
A metal box frame protects the deep pack during lifting, housing insertion and clamping.
Continuous polyurethane potting prevents untreated air from tracking between the media pack and frame.
حلول للتطبيق الخاص بك
Final filters in central systems must tolerate heavier dust loading and repeated handling without losing their air seal or media geometry.
A shallow filter reaches its pressure limit too quickly in a central air handler.The deep media pack spreads captured particles over a larger area and extends the loading path.
Closely packed pleats touch and block airflow after extended operation.Corrugated aluminium separators maintain consistent channels from the upstream to downstream face.
A lightweight frame twists when maintenance staff remove a loaded filter.The rigid metal box and faceguards protect the pack during transport and change-out.
Air bypass occurs where the media pack meets the frame.Full-depth potting seals the pack edge and anchors it against differential-pressure movement.
تطبيقات نموذجية
Central cleanroom supply-air systemsContainment exhaust filter housingsPharmaceutical production air handlersتهوية عزل المستشفىIndustrial high-purity process air
المعلمات الفنية
Representative construction ranges for a deep-pleat high-capacity HEPA filter are shown below.
| المواد الأساسية | Water-resistant borosilicate glass-microfibre HEPA media with corrugated aluminium separators |
|---|---|
| سمك اللوحة | روض عمق الفلتر الإجمالي |
| العرض الفعال | 305-610 مم عرض الوجه الاسمي |
| الحد الأقصى الطول | Up to 1220 mm nominal face height |
| الصلب يواجه سمك | 0.9–1.2 mm galvanized-steel or stainless-steel deep box frame |
| الكثافة الأساسية | Approximately 40–65 kg/m³ equivalent deep-pack media density |
| الموصلية الحرارية | Approximately 0.035–0.045 W/(m·K) for the glass-microfibre filter pack |
| إنهاء السطح | Mill-galvanized steel or clean brushed stainless steel with protective faceguards |
| نوع المشترك | Single or double closed-cell gasket with continuous polyurethane media-pack potting |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
H13 or H14 filter classGalvanized-steel or stainless-steel frameFaceguard أحادي الجانب أو ثنائي الجانبGasket positions to suit front-access or side-access housing
Planning a High-Capacity HEPA Filter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
