English
البرتغالية
الإسبانية
اللغة الملاوية
الإندونيسية
الألمانية
اللغة التركية
اللغة الفيتنامية
الفرنسية
الروسية
العربيةالحالي
التايلاندية
اليابانية
الكورية
معدات التدفق والاحتواء الصفائحية
Glovebox عازل
A modular closed chamber that uses glove ports to separate operators from a selected clean, contained or inert process environment.
- Modular Closed Chamber
- Replaceable Glove Ports
- Positive Negative or Inert Operation
- Configurable Transfer Airlock
مقدمة المنتج
The glovebox isolator is a flexible base platform for processes that need physical separation but do not require a dedicated filling, pharmacy or sterility-test layout. The welded stainless chamber can be configured for filtered positive pressure, filtered negative pressure or inert-gas operation. Glove ports, shelves and service penetrations are arranged around the equipment, while an attached transfer airlock controls material movement. Pressure mode and filtration are selected for the actual product and operator-protection need.
الخصائص الرئيسية
Replaceable glove rings permit different glove materials and port positions.
A transfer airlock isolates material entry from the main work chamber.
Blank service plates accept utilities without field-cutting the pressure shell.
Modular chamber lengths allow a small test setup or longer process train.
حلول للتطبيق الخاص بك
A general glovebox must be configured from the process need rather than assuming one pressure direction or one gas-handling method.
A standard chamber has glove ports in unusable positions.Port locations are set from equipment reach and manipulation studies.
New utilities require drilling through the finished chamber.Replaceable sealed service plates accept planned electrical and process connections.
Material loading exposes the working atmosphere.A separate transfer airlock preserves the main chamber condition.
One pressure mode is assumed for unrelated applications.Positive, negative or inert operation is selected according to product and operator needs.
تطبيقات نموذجية
Closed laboratory processingMoisture-sensitive handlingSmall-scale powder containmentProtected component assembly
المعلمات الفنية
Typical configurable construction ranges for a modular glovebox isolator are listed below.
| المواد الأساسية | Welded SUS304 or SUS316L chamber with laminated safety glass and interchangeable glove assemblies |
|---|---|
| سمك اللوحة | 40-80 mm double-skin chamber and utility sections |
| العرض الفعال | 900-3000 mm usable chamber width |
| الحد الأقصى الطول | Up to 5000 mm modular chamber length |
| الصلب يواجه سمك | 1.5-3.0 mm SUS304 or SUS316L pressure shell |
| الكثافة الأساسية | تقريبا ، من الفولاذ المقاوم للصدأ الأوستنيتي |
| الموصلية الحرارية | 14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي |
| إنهاء السطح | Fine-brushed or electropolished stainless interior with clear laminated viewing panels |
| نوع المشترك | Pressure-tight welded chamber with bolted sealed service plates, glove rings and transfer-airlock flange |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Positive, negative or inert atmosphereSUS304 or SUS316L chamberTransfer airlock or rapid portTwo to eight glove positions
Planning a Glovebox Isolator specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
