English
البرتغالية
الإسبانية
اللغة الملاوية
الإندونيسية
الألمانية
اللغة التركية
اللغة الفيتنامية
الفرنسية
الروسية
العربيةالحالي
التايلاندية
اليابانية
الكورية
معدات التدفق والاحتواء الصفائحية
A محطة نقل الحيوانات
A dual-access ventilated workstation that allows coordinated animal or cage transfer from opposite sides of one protected work zone.
- Dual-Sided Operator Access
- Central Protected Work Zone
- Perimeter Containment Capture
- Long Transfer Surface
مقدمة المنتج
The animal transfer station differs from a single-sided cage changer by allowing operators or cage positions on both sides of the work surface. A central filtered downflow field protects the transfer zone, while perimeter and lower extraction grilles collect dander and airborne bedding. The long open ends accommodate carriers or cages entering from either direction. A rigid stainless frame resists movement during coordinated transfer steps.
الخصائص الرئيسية
A central diffuser supplies clean air over the shared handling area.
Perimeter capture grilles collect particles from both operator sides.
Open ends accommodate long carriers and varied cage formats.
A reinforced fixed or mobile base maintains alignment during two-person work.
حلول للتطبيق الخاص بك
Two-sided handling improves workflow but creates additional open boundaries that require balanced capture around the complete work surface.
Cages must be carried around a single-sided workstation.Opposed access creates a direct transfer path across the central work zone.
One capture grille favors only one operator side.Balanced perimeter grilles collect airborne material from both sides.
Long carriers do not fit beneath fixed end panels.Open end geometry preserves clearance along the transfer axis.
The table shifts during coordinated animal movement.A reinforced chassis with brakes or fixed leveling feet stabilizes the station.
تطبيقات نموذجية
Animal transfer between cagesDual-operator vivarium proceduresCarrier-to-cage movementShared clean handling in research facilities
المعلمات الفنية
Typical configurable construction ranges for a dual-access animal transfer station are listed below.
| المواد الأساسية | SUS304 central work surface and perimeter grilles with powder-coated steel fan base and acoustic mineral-wool lining |
|---|---|
| سمك اللوحة | 35-60 mm double-skin airflow sections |
| العرض الفعال | 1500-2400 mm usable transfer width |
| الحد الأقصى الطول | Up to 3000 mm overall station length |
| الصلب يواجه سمك | 1.2-1.5 mm SUS304 work surfaces; 1.0-1.2 mm outer steel |
| الكثافة الأساسية | بطانة 80-من الصوف المعدني/m³ |
| الموصلية الحرارية | من أجل البطانة الصوتية (m · K) |
| إنهاء السطح | Brushed SUS304 central work zone with cleanable coated service base |
| نوع المشترك | Welded central tray with removable opposed capture grilles and gasketed filter access |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Fixed or mobile chassisHeight-adjustable work surfaceSingle- or dual-filter exhaustCarrier guide rails
Planning a Animal Transfer Station specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
