English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Воздушные фильтры и химическая фильтрация
Молекулярный воздушный фильтр для ЛОС
A high-capacity activated-carbon cell designed to adsorb volatile organic compounds and solvent vapours from process, make-up or recirculated air.
- High-Surface-Area Carbon
- VOC Adsorption
- Low Bypass Construction
- Replaceable Media Cell
Введение продукции
This VOC filter contains virgin coconut-shell or coal-based activated carbon selected for non-polar organic vapours. The adsorbent is packed into a rigid V-bank or box cell to combine a large media mass with practical airflow. Internal screens and seals eliminate edge bypass and limit carbon fines. It is commonly preceded by particulate filtration so dust does not block the carbon pores, and it may be followed by a final filter where product cleanliness is critical.
Основные характеристики
A deep or V-bank bed carries substantially more adsorbent than a thin carbon pad.
Internal media screens reduce carbon migration into the downstream system.
Gasketed frame interfaces suit front- or side-access filter housings.
Решения для вашего приложения
Low-boiling solvents and process VOCs pass through particle filters and may contaminate products or create persistent odour.
A carbon-coated pad saturates quickly during routine solvent use.A deep bed increases usable carbon mass and extends the adsorption interval.
High humidity occupies adsorption sites and shortens filter life.Media grade and airflow residence time are selected for the expected humidity and VOC family.
Dust loads the carbon surface before it can adsorb vapour.An upstream fine-particle stage protects pores and preserves molecular capacity.
Unsealed filter edges let untreated air bypass the media bed.Continuous gaskets and bonded internal joints close the frame-to-housing path.
Типичные приложения
Solvent-handling cleanroomsPrinting and coating areasLaboratory recirculation airElectronics production make-up airOdour control in occupied technical spaces
Технические параметры
Common construction ranges for a deep-bed VOC molecular filter are listed below.
| Основной материал | Virgin activated carbon selected for hydrocarbons, solvents and broad-spectrum VOC adsorption |
|---|---|
| Толщина панели | 150–292 mm overall filter depth |
| эффективная ширина | 305-610 мм номинальная ширина грани |
| Максимальная длина | Up to 762 mm nominal face height |
| Толщина линий стали | 0.7–1.2 mm galvanized or stainless-steel frame and retainers |
| Плотность ядра | 420–560 kg/m³ packed activated-carbon bulk density |
| Теплопроводимость | 0.09–0.18 W/(m·K) for packed activated carbon |
| Поверхностная отделка | Galvanized steel, brushed stainless steel or low-emission powder coat |
| Объединенный тип | Sealed deep-bed or V-bank cell with continuous polyurethane or neoprene gasket |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Coconut-shell or coal-based carbonBox or V-bank geometryScrim-controlled low-dust constructionHeader or box-frame mounting
Planning a VOC Molecular Air Filter specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
