VHP transfer chamber complete three-quarter view with clear doors, shelves and control panel

Оборудование для чистых помещений

Трансферная камера VHP

A double-door material airlock that uses vaporized hydrogen peroxide, controlled airflow and catalytic aeration to transfer heat-sensitive items into aseptic areas.

Automated VHP Decontamination
Interlocked Double Doors
HEPA Single-Pass Airflow
Catalytic Aeration

Запрос котировки Просмотреть продукты

Введение продукции

The VHP transfer chamber encloses tools, consumables and components between interlocked stainless doors for an automated hydrogen-peroxide decontamination cycle. Distributed nozzles promote uniform vapor contact, HEPA-filtered single-pass air manages conditioning and aeration, and a catalyst reduces residual peroxide before release. Adjustable perforated shelves or cart rails accommodate different loads without blocking circulation paths.

Основные характеристики

Distributed VHP injection points expose complex loads throughout the chamber volume.

Independent door interlocks prevent uncontrolled opening between cleanliness zones.

HEPA single-pass airflow and catalytic treatment accelerate controlled aeration.

Removable shelves and optional cart rails adapt the loading arrangement to material flow.

Решения для вашего приложения

Heat-sensitive materials cannot always be autoclaved, while manual wipe-down lacks reproducible coverage for complex loads.

Manual disinfection misses shielded surfaces on complex components.Distributed VHP nozzles and controlled circulation expose the organized load throughout the cycle.

Door opening can connect lower- and higher-grade rooms directly.Independent interlocks allow only the released side to open at the correct process step.

Residual peroxide delays material availability.HEPA single-pass aeration and an integrated catalyst accelerate peroxide decomposition.

Fixed shelving blocks airflow around varied load sizes.Perforated adjustable shelves and optional cart rails support validated load patterns.

Типичные приложения

Aseptic filling-line material transferHeat-sensitive component decontaminationPharmaceutical cleanroom airlocksSterile tool and consumable introduction

Технические параметры

Typical construction values for a pharmaceutical VHP transfer chamber are listed below.

Основной материал	316L stainless steel chamber with safety-glass windows, silicone gaskets and stainless perforated shelves
Толщина панели	50-100 mm insulated enclosure panels
эффективная ширина	800-1800 mm clear chamber width
Максимальная длина	Up to 3000 mm chamber depth or pass-through length
Толщина линий стали	Кожи нержавеющей стали 1,2-1,5mm
Плотность ядра	80-140 кг/м³ для герметичного панельного заполнения
Теплопроводимость	0038-0055 Вт/(м · К) для изолированного заполнения панели
Поверхностная отделка	Satin 316L stainless steel with radiused corners and cleanable perforated shelving
Объединенный тип	Continuously welded chamber with gasketed interlocked doors, sealed HEPA plenums and sanitary VHP nozzle connections
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Shelf, cart or walk-in loadingIntegrated catalyst and room-return exhaustRTP and aseptic liquid transfer connectionsH2O2, pressure, particle and microbial monitoring

Planning a VHP Transfer Chamber specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой