English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Приборы для испытаний и валидации в чистых помещениях
Ультразвуковый DI Водный туманник
A mobile ultrasonic fogger that atomizes DI, ultrapure or WFI water into a clean visible mist for repeatable airflow mapping in controlled environments.
- Clean high-purity water tracer.
- Adjustable ultrasonic fog delivery.
- Drainable stainless mobile system.
Введение продукции
The system combines a stainless water reservoir, submerged ultrasonic transducers and a regulated carrier-air path to generate dense water-only fog without combustion or oil residue. Separate output and delivery controls help technicians match fog volume and exit velocity to the airflow under observation. A flexible sanitary hose carries mist from the mobile base to interchangeable study outlets.
Основные характеристики
Ultrasonic atomization produces a dense visible mist without heating fuel.
Independent fog-volume and carrier-air adjustment supports delicate flow studies.
Stainless water-contact surfaces facilitate draining and routine cleaning.
Flexible hose separates the generator from the actual observation point.
Mobile enclosure protects the reservoir and controls during facility work.
Решения для вашего приложения
A dependable airflow study requires visible, repeatable fog that can follow low-velocity cleanroom patterns without introducing oily residue or an uncontrolled high-energy jet.
Tracer residue can complicate cleaning after a visualization study.The ultrasonic system atomizes suitable high-purity water without oil-based smoke fluid.
Excessive discharge velocity can distort low-speed cleanroom airflow.Separate fog-density and carrier-air controls allow a gentler delivery setting.
A water system can retain moisture between study sessions.Accessible stainless water-contact surfaces and a dedicated drain support controlled emptying and drying.
The generator cannot always stand beside the camera view.A flexible delivery hose positions only the compact outlet within the test area.
Типичные приложения
Pharmaceutical cleanroom smoke studiesUnidirectional airflow mappingHEPA supply-pattern visualizationIsolator and filling-line airflow studiesContainment and migration-path observation
Технические параметры
Typical ultrasonic DI-water fogger construction is outlined below; transducer capacity, reservoir volume and delivery accessories can be configured for the study area.
| Основной материал | Ultrasonic transducer bank, 316L stainless water reservoir, polymer delivery hose and regulated blower |
|---|---|
| Толщина панели | Typically 1.0-1.5 mm for enclosure and reservoir panels |
| эффективная ширина | Approximately 300-500 mm across the mobile cabinet |
| Максимальная длина | Approximately 450-700 mm for cabinet; delivery hose typically 2000-5000 mm |
| Толщина линий стали | Typically 1.0-1.5 mm for stainless cabinet and water-contact reservoir |
| Плотность ядра | Approximately 7950-8000 kg/m³ for 316L stainless steel |
| Теплопроводимость | Approximately 14-16 W/(m·K) for 316L stainless steel |
| Поверхностная отделка | Brushed or electropolished stainless body with dark control panel, clear level indicator and white hose |
| Объединенный тип | Sealed reservoir lid, drain fitting and quick-connect sanitary fog outlet |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Multiple transducer capacitiesStraight or perforated fog outletExtended sanitary delivery hoseRemote controlFog illumination moduleTransport and storage cover
Planning a Ultrasonic DI Water Fogger specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
