STJH-STAINLESS-STEEL-ROCK-WOOL-CLEANROOM-PANEL-HANDMADE-50

Stainless Steel Rock Wool Cleanroom Panel 50 mm Handmade

Slim stainless mineral-core partition for cleanable processing interiors.

304 sheet forms the exposed wall surface.
Mineral infill avoids a polymer foam center.

Введение продукции

Two stainless skins enclose rock-wool infill in a handmade sandwich. The metal surface provides the room finish, while the thin section suits locations where the partition footprint must remain modest.

Основные характеристики

304 sheet forms the exposed wall surface.
Mineral infill avoids a polymer foam center.

Технические параметры

Основной материал	Rock wool
Толщина панели	50 mm
эффективная ширина	980 or 1180 mm
Максимальная длина	6000 mm
Metal Facing Thickness	0.4–0.8 mm
Facing Grade	304 stainless steel
Manufacturing	Handmade panel assembly
Поверхностная отделка	Natural stainless steel
Panel Structure	Metal-faced mineral sandwich
Customization	Available for the intended application and operating environment.

Applications

Slim food-processing partitions
Stainless laboratory room divisions

Solutions for Your Application

Paint is not the preferred finish at the process wall.

The exposed sheet is stainless steel.

A dense wall build-up takes too much circulation space.

The thin mineral sandwich fits within a small partition footprint.

Доступные варианты

Facing gauge choice
Width selection

Planning a Stainless Steel Rock Wool Cleanroom Panel 50 mm Handmade specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой