STjh tall 36 by 36 by 48 inch floor-flush refrigerated pass box with large cooling module and insulated door

STJH-REFRIGERATED-PASS-BOX-36X36X48

Refrigerated Cleanroom Pass Box 36 × 36 × 48 in

A tall flush-floor refrigerated pass-through for bulky temperature-sensitive containers and larger production batches.

36 x 36 x 48 in tall chamber
Flush-floor loading access
Large cold-chain transfer volume

Введение продукции

The 36 x 36 x 48 in chamber is the largest frozen refrigerated model and the only one in this group positioned for flush-floor installation. Its tall interior accepts large containers that cannot be lifted safely to a wall hatch. Closed-loop cooling, an internal circulation fan, insulated welded stainless walls and a condensate drain support short cold-chain transfer holds at the cleanroom boundary.

Основные характеристики

Floor-level heavy loading

Flush-floor access reduces lifting for large containers and compatible low carts.

Tall usable envelope

The 48 in internal height accepts upright batches that will not fit either cubic wall-mounted model.

Managed condensate path

The cooling system includes a drain connection to carry condensation away from the chamber.

Технические параметры

Internal Dimensions	36 W x 36 D x 48 H in
Mounting	Flush floor
Temperature Capability	Down to a 5°C cited setpoint
Cooling Module	Integrated 1050 BTU closed-loop refrigeration
Temperature Cycling	Programmable control with 5°C hysteresis
Construction	Continuous-seam welded 304 or 316 stainless steel
Insulation	0.5 in polyurethane foam
Internal Air Movement	Ceiling-mounted circulation fan
Utilities	120 V electrical supply and condensate drain
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Applications

For large cold-chain containers, upright production batches and temperature-sensitive totes moving between pharmaceutical or biotechnology rooms. Verify floor recess depth, wheel or pallet interface, payload, door opening frequency and heat released by the load before selecting the tall chamber.

Solutions for Your Application

Heavy cold containers are unsafe to lift into a wall-mounted refrigerated hatch.Use the flush-floor configuration to load compatible containers at floor level and minimize manual elevation changes.

A densely packed tall chamber develops uneven air temperature around the product.Plan rack positions and load spacing to keep the ceiling-fan circulation path open, then verify recovery under the actual loading pattern.

Доступные варианты

Choose stainless grade, low-profile ramp where appropriate, removable racks, access controls and environmental monitoring. Coordinate condensate disposal and provide service access above the chamber for the compressor, condenser and fan system.

Planning a Refrigerated Cleanroom Pass Box 36 × 36 × 48 in specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой