STJH-PIR-INSULATED-CLEANROOM-PANEL-1000-100

PIR Insulated Cleanroom Panel 100 mm with 1000 mm Cover Width

Mid-depth PIR enclosure panel for separating controlled room temperatures.

Foam infill avoids a separate insulation lining.
Paired metal skins provide finished interior surfaces.

Введение продукции

The two coated metal skins are held apart by a 100 mm sandwich section. This thicker enclosure format retains the same regular cover width while increasing the distance through the insulated wall.

Основные характеристики

Foam infill avoids a separate insulation lining.
Paired metal skins provide finished interior surfaces.

Технические параметры

Основной материал	PIR foam
Толщина панели	100 mm
эффективная ширина	1000 mm
Толщина линий стали	0.5–0.8 mm
Facing Material	Pre-painted galvanized steel
Skin Arrangement	Double-sided metal
Base Interface	Modular base profiles
Поверхностная отделка	Factory-painted steel
Corner Interface	L-bar trim
Customization	Available for the intended application and operating conditions.

Applications

Temperature-separated process rooms
Insulated cleanroom perimeter divisions

Solutions for Your Application

Adding a separate insulated lining creates extra installation layers.

The foam and finished faces arrive as a single sandwich component.

Thicker panels must still align with the room bay grid.

The one-meter cover module is retained across this depth.

Доступные варианты

Alternative steel gauge
Compatible enclosure trims

Planning a PIR Insulated Cleanroom Panel 100 mm with 1000 mm Cover Width specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой