STjh wide 1200 mm stainless mobile sampling booth with two-section EU13 roof filter and LED work light

STJH-MOBILE-SAMPLING-BOOTH-1200X800X1200

Mobile Sampling Booth 1200 × 800 × 1200 mm

The widest tabulated mobile sampling vehicle for larger containers and broad sampling layouts in warehouse aisles.

1200 mm widest working face
At least 300 lux task lighting
Caster-mounted stainless chassis

Введение продукции

This 1200 x 800 x 1200 mm vehicle adds the broadest working face in the mobile sampling series while retaining an 800 mm depth. Its 304 stainless chassis runs on casters and combines pressure indication with the family's 0.25-0.6 m/s airflow range. Lighting of at least 300 lux supports inspection around larger container openings.

Основные характеристики

Broad container access

The 1200 mm face provides hand and tool clearance around larger raw-material containers.

Move-to-material workflow

Casters let the booth serve multiple sampling locations without relocating unopened containers.

Visible operating condition

Pressure indication and integrated lighting assist routine setup checks before sampling.

Технические параметры

Overall Dimensions	1200 W x 800 D x 1200 H mm
Construction	304 stainless steel
Mobility	Caster wheels
Air Velocity	0.25-0.6 m/s family range
Monitoring	Pressure gauge
Lighting	≥300 lux
Clean-Zone Basis	ISO Class 5 / Class 100 row designation
Filter Arrangement	Filtered supply and exhaust family configuration
Typical Load	Larger containers and broad sampling layouts
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Applications

For incoming-material sampling from larger containers where a full fixed booth is unnecessary. Lock the casters, position the container within the airflow zone and confirm filter suitability for the material.

Solutions for Your Application

A 1000 mm station crowds sampling tools around a large container.Use the 1200 mm face to preserve working clearance without increasing depth.

Warehouse lighting is insufficient for sample inspection.Use the integrated lighting specification of at least 300 lux at the task area.

Доступные варианты

Configure filter stages, electrical supply, work surface, pressure alarm, caster locks and stainless finish. Opening geometry can follow the container range.

Planning a Mobile Sampling Booth 1200 × 800 × 1200 mm specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой