STJH-MINI-PLEAT-HEPA-H14-100

Mini-Pleat HEPA Filter 100 mm High-Capacity H14

The deepest H14 mini-pleat panel in this group, intended for higher airflow or longer loading life.

100 mm maximum pack depth
H14 high-capacity design
Up to 71 °C operation

Введение продукции

At 100 mm, this anodized-aluminum H14 panel contains the deepest microfine glass mini-pleat pack in the family. The greater media area can support higher airflow or longer service compared with the 53 mm and 70 mm panels, subject to the selected face size. It is intended for high-air-change cleanrooms and terminal housings with sufficient plenum depth.

Основные характеристики

Maximum family media area

The deeper pack accommodates more pleated surface within the same selected face dimensions.

High-air-change suitability

Additional media area supports terminal applications that demand greater volume through each ceiling opening.

Longer-life potential

Lower media loading per unit area can extend service under comparable contamination and operating conditions.

Технические параметры

Media Pack Depth	100 mm
Efficiency Classification	H14
Media Type	Microfine glass fiber
Pleat Construction	Hot-melt separated mini-pleats
Frame	Anodized aluminum
Maximum Operating Temperature	71 °C
Capacity Position	Highest media area in this mini-pleat family
Housing Requirement	Terminal with sufficient 100 mm pack clearance
Intended Duty	High-air-change final filtration
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Applications

Suitable for high-air-change pharmaceutical, electronics and healthcare cleanrooms where each terminal opening must provide substantial filtered airflow. The ceiling module must accommodate the 100 mm pack and allow safe room-side or plenum-side replacement.

Solutions for Your Application

A slimmer panel reaches its pressure or airflow limit in a high-air-change ceiling.The 100 mm pack provides the largest media area in this family for greater operating capacity.

The deeper filter conflicts with ducts or services above the ceiling.Verify full plenum clearance, removal path and housing depth before selecting the high-capacity panel.

Доступные варианты

Confirm face size, seal type, upstream or downstream faceguard, frame flange and available ceiling-plenum depth.

Planning a Mini-Pleat HEPA Filter 100 mm High-Capacity H14 specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой