STJH-INSTRUMENT-TEST-PORT-AIR-DUCT-2IN-INSULATION

Instrument Test Port for Air Duct 2-Inch Insulated

An extended measurement fitting for thickly insulated ductwork.

Extra reach preserves access on heavily insulated ducts.
A positive locking cap reduces reliance on temporary hole plugs.

Введение продукции

The longer casting carries the plug above a two-inch insulation layer. Its slightly larger bore accommodates probe insertion while the cam-operated neoprene closure restores the seal between measurements.

Основные характеристики

Extra reach preserves access on heavily insulated ducts.
A positive locking cap reduces reliance on temporary hole plugs.

Технические параметры

Insulation Reach	2 in. (50.8 mm)
Clear Bore	1-1/8 in.
Construction	Cast zinc-alloy body
Closure Cap	Heavy-gauge zinc-plated steel
Expansion Element	Neoprene plug
Locking Action	Cam operated
Maximum Temperature	180 °F (82 °C)
Base Seal	Flat neoprene gasket
Service Function	Reusable instrument access
Customization	Available for the insulation build-up and intended measurement instruments.

Applications

Thickly insulated supply ducts
Repeated airflow checks on cold-air branches

Solutions for Your Application

A short test fitting becomes buried in the insulation.

The two-inch body extends the access point through the thicker build-up.

The insulation is disturbed whenever a probe is inserted.

The permanent extended neck separates the probe opening from the surrounding insulation.

Доступные варианты

Additional mounting sealant
Measurement-point positioning

Planning a Instrument Test Port for Air Duct 2-Inch Insulated specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой