STjh 8046 CFM hygienic air handling unit with a broad rectangular filter face and central treatment modules on white.

STJH-HYGIENIC-AIR-HANDLING-UNIT-8046CFM

Hygienic Air Handling Unit 8046 CFM

A large 8046 CFM hygienic air handler with a 1698 x 1378 mm rectangular face for central filtration, conditioning and optional energy recovery.

8046 CFM central duty
1698 x 1378 mm rectangular casing
Multiple heat-recovery choices

Запрос котировки Просмотреть продукты

Введение продукции

The 1698 x 1378 mm casing provides a substantially broader component face for central hygienic air treatment. It can combine multi-stage filtration, large wet coils and wheel, plate or run-around heat recovery while maintaining accessible, cleanable internal sections for pharmaceutical or surgical departments.

Основные характеристики

Central-system capacity

The enlarged cabinet supports the filter and coil surface needed for several controlled rooms or a large department.

Recovery configuration choice

Wheel, plate or run-around coil arrangements allow energy recovery to match air-stream separation requirements.

Hygienic service zones

Separate access to filters, coils, drains and fans supports documented inspection and cleaning routines.

Технические параметры

Nominal Airflow	8046 CFM
Cabinet Face	1698 x 1378 mm
Casing	Large double-skin hygienic cabinet
Internal Surface	Smooth cleanable finish with material options
Filtration	Multi-stage fine filtration with optional HEPA
Wet Section	Accessible cooling coil and sloped drain pan
Heat Recovery	Wheel, plate or run-around coil option
Fan Section	Direct-drive plug-fan or fan-array selection
Installation	Central indoor or weatherproof outdoor system
Customization	Recovery type, internal materials and section arrangement can be configured for the intended application and operating environment.

Applications

Central pharmaceutical manufacturing, hospital surgical departments, sterile processing areas and hygienic production blocks with multiple served zones.

Solutions for Your Application

A shared system must recover energy without choosing an unsuitable cross-air-stream arrangement.Select a wheel, plate or run-around coil according to the required separation and recovery duty.

Large central equipment can be difficult to inspect thoroughly.Divide the casing into accessible hygienic sections with lighting and inspection provisions where needed.

Доступные варианты

Stainless internal construction, high-grade filters, large coil banks, humidification, three recovery technologies, fan arrays, silencers and supervisory controls are available.

Planning a Hygienic Air Handling Unit 8046 CFM specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой