STJH-EXTERNAL-90-DEGREE-CLEANROOM-CORNER-PROFILE-50-PREFORMED

External 90-Degree Cleanroom Corner Profile 50 mm Preformed Module

A preformed 50 mm exterior corner with a rigid aluminum-box interior.

Box sections create a rigid internal corner structure.
Finished skins wrap the preformed module.
The integrated edge reduces separate flashing and capping pieces.

Введение продукции

Three aluminum box extrusions form the internal structure of this single-piece corner. The 50 mm inner faces and 100 mm outer faces establish the offset geometry required to turn a 50 mm wall through a right angle with finished skins around the edge.

Основные характеристики

Box sections create a rigid internal corner structure.
Finished skins wrap the preformed module.
The integrated edge reduces separate flashing and capping pieces.

Технические параметры

Module Thickness	50 mm
Internal Face Dimensions	50 x 50 mm
External Face Dimensions	100 x 100 mm
Максимальная длина	3000 mm
Structural Material	6063 aluminum
Internal Construction	Three box extrusions
Corner Angle	90 degrees
Assembly Form	Single preformed module
Edge Interface	Sealed tongue edges
Customization	Available to suit the intended application and operating environment.

Applications

50 mm modular cleanroom outer corners
Flush wall returns requiring a rigid preformed module

Solutions for Your Application

Separate skins and trims make the external corner difficult to align.

The preformed module establishes the offset geometry before installation.

A thin applied angle lacks a substantial internal structure.

Three box extrusions form the corner's rigid interior.

Доступные варианты

Matching panel-skin finish
Cut corner heights

Planning a External 90-Degree Cleanroom Corner Profile 50 mm Preformed Module specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой