STJH-DUCT-VIBRATION-ISOLATOR-1IN-50LB

Duct Vibration Isolator 1-Inch Deflection 50 lb Spring

A light-load spring hanger for isolating small suspended duct sections.

The spring load class suits lightweight suspended components.
Rod clearance accommodates modest suspension misalignment.

Введение продукции

The open housing contains a compression spring and neoprene isolation element. The lighter spring selection permits useful deflection under a modest hanger load, avoiding the limited movement that can occur when an oversized spring is fitted.

Основные характеристики

The spring load class suits lightweight suspended components.
Rod clearance accommodates modest suspension misalignment.

Технические параметры

Rated Hanger Load	50 lb
Rated Deflection	1 in. (25.4 mm)
Misalignment Capacity	Up to 30 degrees
Housing Finish	Galvanized
Spring Material	Steel
Spring Finish	Powder coated
Isolation Element	Neoprene
Mounting	Suspended hanger
Load Path	Axial spring compression
Customization	Available for the intended support load and suspended duct arrangement.

Applications

Light terminal duct suspension
Small fan-adjacent duct supports

Solutions for Your Application

A heavy spring barely deflects beneath a light branch.

The 50 lb selection provides a spring class appropriate to smaller support loads.

An angled rod could touch the housing and bypass the spring.

The misalignment clearance helps preserve separation at the rod opening.

Доступные варианты

Neoprene spring cup
In-line neoprene element
Suspension hardware arrangement

Planning a Duct Vibration Isolator 1-Inch Deflection 50 lb Spring specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой