STjh 160 mm 508 m3/h circular inline duct fan with a broad centrifugal housing and large connections on white.

STJH-CIRCULAR-INLINE-DUCT-FAN-160MM-508M3H

Circular Inline Duct Fan 160 mm 508 m3/h

The largest selected circular fan for higher-flow equipment and clean utility exhaust branches.

160 mm duct diameter
508 m3/h maximum airflow
2538 rpm impeller

Введение продукции

The 160 mm model increases maximum airflow to 508 m3/h using a 66.3 W motor and 2538 rpm impeller. Its larger wheel and duct connection provide substantially more capacity than the 100 and 125 mm fans, making it suitable for equipment ventilation and longer utility branches. The higher speed requires careful acoustic and vibration control near occupied or measurement-sensitive areas.

Основные характеристики

High branch airflow

The larger impeller serves equipment or utility exhaust beyond the capacity of small circular fans.

Compact inline package

Despite higher flow, the motor and impeller remain inside a round duct-mounted housing.

Controllable ventilation duty

Compatible speed control can trim airflow when the selected motor and controller allow it.

Технические параметры

Duct Diameter	160 mm
Maximum Airflow	508 m3/h
Input Power	66.3 W
Impeller Speed	2538 rpm
Housing	Metal circular inline casing
Motor	Integrated high-flow motor
Installation	Round duct branch
Control	Compatible speed control by selection
Primary Duty	Equipment and utility exhaust
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Applications

For higher-flow clean utility exhaust, equipment ventilation, heat removal and medium circular return branches.

Solutions for Your Application

The high-speed fan creates tonal noise at the connected grille.Check outlet velocity and acoustic spectrum, then add a silencer and flexible connectors where required.

The fan operates far from its curve after a dirty filter raises resistance.Include final filter loss in selection and monitor airflow or pressure as the system loads.

Доступные варианты

Confirm duty curve, voltage, controller, mounting, silencer, damper, flexible connections, access and high-temperature requirement.

Planning a Circular Inline Duct Fan 160 mm 508 m3/h specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой