STJH-ANTISTATIC-FLEXIBLE-DUCT-HOSE-DN100

Antistatic Flexible Duct Hose DN100 Permanently Antistatic PU

Medium antistatic transfer hose for process equipment connections.

Larger bore suits mixer and packaging-machine connections.
Embedded reinforcement supports suction duty.

Введение продукции

The 100 mm lined bore accommodates a larger process stream while the reinforced wall maintains the hose profile. Its moderate flexibility suits planned equipment offsets, with the bend radius selected to preserve the smooth internal passage during use.

Основные характеристики

Larger bore suits mixer and packaging-machine connections.
Embedded reinforcement supports suction duty.

Технические параметры

Nominal Bore	100 mm
Outer Diameter	120 mm
Wall Polymer	Polyurethane
Helix Material	Spring steel
Pressure at 20 °C	3.03 bar
Vacuum Rating at 20 °C	0.94 bar
Minimum Bend Radius	428 mm to inner lining
Antistatic Surface Resistance	Less than 10^9 ohm
Continuous Temperature	−40 to +90 °C
Customization	Available for the actual equipment connection and operating environment.

Applications

Granulator extraction connections
Powder mixer transfer links

Solutions for Your Application

A connector must handle a larger solids stream.

The medium bore increases the available passage area.

Tight routing could deform the lining.

A generous bend radius preserves the hose section and smooth internal route.

Доступные варианты

Machine-specific lengths
End coupling selection

Planning a Antistatic Flexible Duct Hose DN100 Permanently Antistatic PU specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой