English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
A fixed seal rubs while the door moves.
Deflation retracts the active profile before opening.
STJH-AIRTIGHT-CLEANROOM-DOOR-GASKET-INFLATABLE
Airtight Cleanroom Door Gasket Inflatable Silicone
Inflate the silicone perimeter only after closure, then retract it before the door moves.
- Retraction reduces contact during door movement.
- Joined-loop construction suits a continuous perimeter.
- An air connection distinguishes the active seal from passive profiles.
Введение продукции
This gasket forms an active sealing loop from a hollow silicone extrusion with an air connection. Pressure expands the profile against the mating surface, and deflation allows it to retract for opening. Straight lengths, endless loops and molded-corner arrangements accommodate different door geometries. The supplied component is the seal assembly, intended to work with a separate pneumatic supply and control sequence rather than relying on the leaf to compress a fixed bulb.
Основные характеристики
- Retraction reduces contact during door movement.
- Joined-loop construction suits a continuous perimeter.
- An air connection distinguishes the active seal from passive profiles.
Технические параметры
| Seal Material | Silicone |
|---|---|
| Profile Type | Inflatable hollow extrusion |
| Actuation | Pneumatic inflation and retraction |
| Typical Family Pressure | 1–5 bar, profile dependent |
| Geometry Options | Straight, endless loop or molded corners |
| Sealing Contact | Expansion against mating surface |
| Air Interface | Seal inflation connection |
| Control Arrangement | Separate pneumatic control |
| Product Scope | Gasket assembly |
| Customization | Loop dimensions and profile geometry can suit the intended door and sealing gap. |
Applications
- Pneumatically sealed containment doors.
- Repeated-access openings requiring seal retraction.
Solutions for Your Application
The opening requires a continuous four-sided seal.
An endless loop with suitable corners follows the perimeter.
Доступные варианты
- Molded corner geometry.
- Compatible inflation valve.
- Profile-specific retaining arrangement.
Planning a Airtight Cleanroom Door Gasket Inflatable Silicone specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
