English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Воздушные фильтры и химическая фильтрация
Фильтр HEPA
A shallow mini-pleat HEPA panel designed for cleanroom ceiling modules and process equipment where installation depth is tightly restricted.
- Shallow 45–69 mm Profile
- Mini-Pleat Glass Media
- Lightweight Aluminium Frame
- Terminal-Housing Compatibility
Введение продукции
The slim HEPA filter compresses a high-area glass-microfibre mini-pleat pack into a low-profile anodized-aluminium frame. Narrow hot-melt spacers maintain defined flow passages, while continuous polyurethane potting locks the short pack into the frame. A downstream faceguard protects the media without adding significant depth. The reduced profile is useful for cleanroom terminal boxes, laminar-flow workstations and compact equipment enclosures where ductwork, lighting or services leave little space above the filter face.
Основные характеристики
Dense mini-pleat geometry preserves useful media area within the shallow construction.
Extruded aluminium frame members provide straight gasket lands without unnecessary mass.
A fine downstream faceguard prevents accidental contact with the exposed pleat tips.
Решения для вашего приложения
Space-limited cleanroom equipment still requires a dependable final filter, but a standard deep panel can conflict with ductwork, lighting or machine envelopes.
The available ceiling void cannot accommodate a 90–150 mm filter frame.A shallow extruded frame reduces the installed depth while retaining a mini-pleat HEPA media pack.
A short filter pack loses too much effective media area.Closely controlled pleat pitch places more filter surface into the limited frame volume.
Thin media is easily touched during installation into compact equipment.A fitted expanded-metal faceguard protects the discharge face and pleat tips.
Uneven clamping bends a lightweight shallow frame.Reinforced aluminium corners and a continuous gasket land distribute compression around the perimeter.
Типичные приложения
Low-profile cleanroom ceiling terminalsРабочие места с ламинарным потокомIsolator and enclosure supply modulesCompact fan filter unitsEquipment mini-environments
Технические параметры
Typical construction ranges for a low-profile slim HEPA filter are shown below.
| Основной материал | Water-resistant glass-microfibre HEPA media with fine hot-melt mini-pleat separators |
|---|---|
| Толщина панели | 45–69 mm overall frame depth |
| эффективная ширина | 305-610 мм номинальная ширина грани |
| Максимальная длина | Номинальная длина лицевой стороны до 1220 мм |
| Толщина линий стали | 0.4–0.5 mm powder-coated expanded-steel protective faceguard |
| Плотность ядра | Approximately 32–48 kg/m³ equivalent compact media-pack density |
| Теплопроводимость | Approximately 0.035–0.043 W/(m·K) for the glass-microfibre media |
| Поверхностная отделка | Natural anodized aluminium with clean white powder-coated faceguard |
| Объединенный тип | Continuous EPDM gasket or shallow polyurethane gel channel |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
45 mm, 54 mm or 69 mm frame depthH13 or H14 media packUpstream gasket or downstream gel sealOne-sided or two-sided faceguard
Planning a Slim HEPA Filter specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
