English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Стенные и потолочные системы для чистых комнат
Единая панель чистой комнаты из MgO каменной шерсти
An asymmetric cleanroom wall panel with one MgO reinforcement board positioned beneath the designated steel face, giving targeted substrate strength while using less material and weight than a double-sided MgO construction.
- One-Sided MgO Reinforcement
- Lower Composite Weight
- Defined Reinforced Face
- Rock Wool Insulation
Введение продукции
This panel combines a rock wool core, one magnesium oxide reinforcement board and two cleanable steel facings. The MgO layer is deliberately placed on the side that needs a firmer substrate, while the opposite side retains a simpler build-up. Clear orientation marking ensures that the reinforced face is installed toward equipment, utility or impact exposure. The panel is useful where wall functions differ from one side to the other and a full double-MgO construction would add unnecessary weight.
Основные характеристики
Reduced inorganic-board content lowers handling weight compared with double-sided reinforcement.
Orientation marks make the reinforced surface easy to identify during installation.
The rock wool core provides mineral insulation while remaining closed behind metal facings.
Dedicated inserts can be added behind known accessory positions without reinforcing the whole panel.
Решения для вашего приложения
This panel addresses installations where only one wall face needs a rigid substrate or added impact support.
Using two MgO boards adds weight where only one face needs reinforcement.The asymmetric build-up places a single board behind the functional side of the wall.
Installers can accidentally reverse a one-sided reinforced panel.Permanent face identification and directional packaging keep the MgO side correctly oriented.
Light fittings may crush an unsupported mineral-core surface.The MgO layer spreads low to moderate fastening loads over a wider area.
Different activities on opposite sides of a wall require different surface behavior.The panel construction assigns the reinforced face to the more demanding side while preserving a clean finish on both sides.
Типичные приложения
Cleanroom walls with a utility-side faceLaboratory partitions supporting light fittingsRetrofit enclosures with handling limitsEquipment perimeter wallsMedical-device production partitions
Технические параметры
Standard construction ranges for the one-sided MgO reinforced rock wool panel are listed below.
| Основной материал | Rock wool core with one 5 mm MgO reinforcement board |
|---|---|
| Толщина панели | 50, 75, 100 или 150 мм |
| эффективная ширина | 980 or 1180 mm |
| Максимальная длина | 6000 мм |
| Толщина линий стали | 0,40-0,60 мм |
| Плотность ядра | 100–140 kg/m³ rock wool |
| Теплопроводимость | 0.040–0.045 W/(m·K) |
| Поверхностная отделка | Pre-painted galvanized steel; stainless steel on the exposed side available |
| Объединенный тип | Framed tongue-and-groove joint with marked panel orientation |
| Customization | Доступно в зависимости от предполагаемого приложения и операционной среды |
Доступные варианты
Left- or right-side reinforcementAccessory backing insertsDifferent finishes on opposite facesFactory-cut service openings
Planning a Single MgO Rock Wool Cleanroom Panel specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
