English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Уборка, дезинфекция и стерилизация чистых помещений
Обувь Sole Tacky Roller
Walk-over shoe-sole tacky roller station that presents a continuously refreshed adhesive film for capturing footwear particles at controlled-area entrances.
- Walk-over particle capture at entry points
- Enclosed take-up protects used adhesive
- Replaceable continuous tacky-film cartridge
Введение продукции
The Shoe Sole Tacky Roller is a low-profile stainless station with a supported adhesive film across the walking surface. Each pass presses shoe soles against the tacky layer to collect dry dust and fibers; an indexed roller mechanism advances used film into the enclosed housing and exposes a fresh section. A stable non-slip frame and shallow step height support routine personnel flow without loose peel-off sheets around the entrance.
Основные характеристики
Indexed film advance maintains a usable tack surface.
Used film winds into a closed compartment.
Low step height supports natural walking movement.
Stainless outer housing is easy to wipe down.
Cartridge design simplifies consumable replacement.
Решения для вашего приложения
The station addresses inconsistent sticky-mat replacement, exposed loaded sheets, variable footwear contact and entrance congestion.
Overused adhesive surfacesIndexed advance exposes fresh tack at defined intervals.
Contaminated sheet disposalLoaded film winds into an enclosed take-up roll.
Incomplete sole contactThe supported broad surface allows a normal step across the adhesive zone.
Difficult sanitationBrushed stainless exterior panels tolerate routine wipe-down.
Типичные приложения
Cleanroom gowning-room entrancesPersonnel airlocksElectronics assembly access pointsPharmaceutical support corridorsКонтролируемые зоны упаковки
Технические параметры
The following values describe compact automatic adhesive-film sole cleaners for gowning rooms, airlocks and controlled production entries.
| Основной материал | Low-density polyethylene adhesive film on polymer roller cores |
|---|---|
| Толщина панели | 2.0 mm stainless top-panel thickness |
| эффективная ширина | 500-700 mm walking width |
| Максимальная длина | 1200 mm overall station length |
| Толщина линий стали | 1.5-2.0 mm Type 304 stainless enclosure thickness |
| Плотность ядра | 920 kg/m³ nominal polyethylene film density |
| Теплопроводимость | 0.33 W/(m·K) nominal for polyethylene film |
| Поверхностная отделка | Brushed stainless housing with blue pressure-sensitive film |
| Объединенный тип | Indexed supply-and-take-up roller cartridge within hinged enclosure |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Manual pedal or automatic indexed advance500, 600 or 700 mm walking widthBlue, white or transparent tacky filmFreestanding or recessed installationEntry counter and film-use indicator
Planning a Shoe Sole Tacky Roller specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
