English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Утилитарные системы для чистых помещений
санитарные трубы из нержавеющей стали
Polished 316L hygienic tube runs and fabricated spools engineered for drainable clean-utility distribution with controlled welds and low-hold-up connections.
- Hygienic 316L flow path
- Orbital-weld-ready tube ends
- Drainable low-hold-up routing
Введение продукции
Sanitary Stainless Steel Piping forms the product-contact backbone of purified-water, WFI, clean-steam and hygienic process systems. Straight tubes and prefabricated spools use controlled dimensions, smooth internal surfaces and repeatable weld preparation so field joints can be aligned, purged and inspected without creating avoidable crevices or pockets.
Основные характеристики
Controlled tube outside diameter and wall
Mechanical-polish or electropolish options
Square-cut orbital-weld preparation
Prefabricated branch and return spools
Drain-slope and support coordination
Hygienic clamp termination options
Heat and surface traceability options
Решения для вашего приложения
Reliable sanitary piping requires more than smooth tube: slope, weld penetration, support spacing, internal finish and branch geometry all influence drainage and cleanability.
Field joints become misaligned or internally steppedUse matched tube tolerances, square-cut ends and controlled orbital-weld fit-up.
Low points retain water after shutdownCoordinate spool geometry, supports and installed slope around defined drains.
Rough surfaces trap residues and accelerate rouge buildupSelect and verify an internal finish appropriate to the utility and cleaning regime.
Excess field welding extends shutdown workPrefabricate surveyed spool sections with planned weld and clamp breakpoints.
Типичные приложения
Purified Water distributionWater for Injection loopsClean-steam headersCIP and SIP circuitsHygienic product transfer
Технические параметры
Tube standard, diameter, wall, surface grade, spool geometry and support arrangement are selected for pressure, temperature, drainage and installation constraints.
| Основной материал | 316L stainless steel hygienic tube and fabricated spool components |
|---|---|
| Толщина панели | Tube wall typically 0.89–2.77 mm |
| эффективная ширина | Tube outside diameter typically 6.35–152.4 mm |
| Максимальная длина | Straight tube length typically up to 6000 mm |
| Толщина линий стали | Fabricated support plate typically 1.5–3.0 mm |
| Плотность ядра | Плотность нержавеющей стали 316L приблизительно 8000 kg/m³ |
| Теплопроводимость | Нержавеющая сталь 316L примерно 15 Вт/(м · К) при температуре окружающей среды |
| Поверхностная отделка | Mechanically polished or electropolished internal surface with clean satin exterior |
| Объединенный тип | Orbital butt welds with hygienic clamp unions at planned service breakpoints |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
ASME BPE, ISO or EN tube dimensionsMechanical-polish or electropolish gradePrefabricated branch spoolsHygienic clamp breakpointsSlope-matched supportsHeat tracing and insulation interfaceMaterial and weld documentation package
Planning a Sanitary Stainless Steel Piping specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
