Circular rapid transfer port with fixed stainless barrier door

Оборудование для ламинарного потока и ограничения

Порт быстрой перевозки

A fixed circular barrier port that docks with a compatible container or bag interface so both doors can open together without exposing their contaminated outer faces.

Double-Door Transfer Principle
Interlocked Circular Docking
Fixed Barrier Alpha Port
Multiple Useful Diameters

Запрос котировки Просмотреть продукты

Введение продукции

The rapid transfer port mounts to an isolator, RABS or cleanroom wall and forms the fixed half of a double-door transfer system. A compatible removable container or bag port docks by guided rotation or another secure lock. The two doors couple so their exposed faces remain closed together while the combined opening provides access through the barrier. Mechanical interlocks prevent the fixed door from opening without a correctly connected counterpart and prevent undocking while the doors are open.

Основные характеристики

A fixed circular frame integrates directly into the barrier wall.

Mechanical interlocks enforce the correct dock-open-close-undock sequence.

Coupled doors isolate their previously exposed surfaces during transfer.

Replaceable lip seals maintain the connection around the selected port size.

Multiple diameters accommodate small components, tools, bags or containers.

Решения для вашего приложения

A barrier port must prevent incorrect opening and keep the two exposed door faces isolated throughout connection and disconnection.

The barrier door can open without a transfer container.A mechanical interlock blocks the fixed door until the compatible port is fully docked.

The container is removed while the door remains open.The locking sequence prevents undocking until both door halves are closed.

Misalignment damages the seal during connection.Guide features and a defined rotational lock center the two circular interfaces.

One port size is unsuitable for both tools and bulk components.A family of useful diameters supports different transfer loads.

Типичные приложения

Изолятор передачи материалаRABS component loadingSterile tool transferContained waste removal

Технические параметры

Typical configurable construction ranges for a rapid transfer port are listed below.

Основной материал	SUS316L fixed frame and door with engineering-polymer lock components and FDA-compatible silicone lip seals
Толщина панели	30-80 mm compatible barrier-wall thickness
эффективная ширина	95-440 mm useful transfer diameter
Максимальная длина	Up to 460 mm nominal outer port diameter
Толщина линий стали	2.0-4.0 mm SUS316L frame and door components
Плотность ядра	Approximately 8000 kg/m³ for SUS316L structural parts
Теплопроводимость	14-16 Вт/(м · К) для аустенитной нержавеющей стали
Поверхностная отделка	Electropolished or fine-brushed SUS316L with smooth cleanable polymer lock surfaces
Объединенный тип	Flanged fixed port with double-door mechanical interlock and replaceable circumferential lip seals
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

105-460 mm nominal sizesManual or externally actuated openingStainless container or single-use bag interfaceBarrier-wall adapter flange

Planning a Rapid Transfer Port specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой