English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Обработка и хранение материалов в чистых помещениях
Переходный конвейер
A stainless conveyor pass-through chamber with interlocked gasketed doors, HEPA filtration and automated roller transfer.
- Interlocked transfer tunnel separates adjacent cleanliness zones
- Conveyorized path reduces manual handling during material transfer
- HEPA-filtered chamber supports controlled purge between door cycles
Введение продукции
This conveyorized pass-through combines a cleanable stainless tunnel, transparent access doors at opposite ends, a continuous roller bed and a top fan-filter module. The control system sequences doors and conveyor movement so the two zone openings are not exposed simultaneously.
Основные характеристики
HEPA-filtered airflow supports chamber purge between cycles.
Integrated rollers move compatible trays without entering the tunnel.
Transparent doors provide load and chamber visibility.
Smooth internal panels reduce difficult-to-clean ledges.
Решения для вашего приложения
Frequent material passage can disrupt pressure separation and increase handling at the boundary between controlled areas.
Both rooms being exposed at onceThe control interlock permits only one access door to open.
Particles remaining after loadingA timed HEPA purge refreshes chamber air before the next door cycle.
Manual reaching into the transfer chamberThe roller conveyor advances compatible loads through the tunnel.
Poor cycle visibilityTransparent doors and status controls show chamber condition.
Типичные приложения
Automated tray and container transfer between packaging, preparation, filling, inspection and controlled storage zones.
Технические параметры
Chamber length, conveyor height, door actuation, purge timing and roller drive are configured around the material flow and room pressure strategy. Sensors and programmable controls coordinate load detection with the interlock sequence.
| Основной материал | Type 304 stainless steel tunnel, roller conveyor and H14 HEPA fan-filter module |
|---|---|
| Толщина панели | 30–50 mm double-wall chamber sections |
| эффективная ширина | 500–1000 mm clear transfer width |
| Максимальная длина | Up to 2500 mm overall conveyorized module length |
| Толщина линий стали | 1.2–2.0 mm |
| Плотность ядра | 7930 кг/м³ номинальная плотность нержавеющей стали |
| Теплопроводимость | Приблизительно 16,2 Вт/(м · К) при комнатной температуре |
| Поверхностная отделка | Fine-brushed and passivated stainless steel with smooth internal panels |
| Объединенный тип | Seam-welded tunnel with interlocked gasketed lift doors and modular sealed roller conveyor |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Powered or gravity rollers, vertical lift or swing doors, barcode tracking, purge timers, pressure monitoring, ESD configuration and custom conveyor interfaces.
Planning a Pass-Through Conveyor specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
