English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Запчасти для оборудования для чистых помещений
Воздушный душ
An adjustable stainless steel jet nozzle that directs high-velocity filtered air across garments, components and packaged materials inside an air shower.
- Directional Ball Joint
- Satin Stainless Steel
- Four-Hole Mounting Flange
- Focused Air Jet
Введение продукции
The air shower nozzle converts plenum airflow into a focused cleaning jet and allows its discharge direction to be set during commissioning. Its spherical eyeball rotates within a circular retaining flange, while a short smooth outlet limits unnecessary turbulence. Satin stainless-steel construction suits repeated cleaning and visually matches common air-shower interiors. Replacement work should verify flange diameter, mounting-hole pitch, outlet bore and available adjustment clearance.
Основные характеристики
A smooth circular outlet provides a defined discharge path without protruding vanes.
Four countersunk mounting holes distribute clamping around the round flange.
Satin stainless-steel surfaces provide durable, cleanable exposed hardware.
Решения для вашего приложения
Nozzle geometry and aiming range determine whether filtered air reaches the intended surfaces without leaving sheltered zones.
A fixed outlet cannot be aimed at garment folds or irregular material loads.The spherical eyeball provides directional adjustment during air-shower balancing.
An incorrect flange diameter leaves exposed cutouts in the cabinet panel.The mounting flange and hole pitch can be matched to the existing panel opening.
Rough internal edges create noise and an uneven discharge pattern.A smooth machined outlet supports a focused and repeatable air jet.
Corroded or difficult-to-clean outlets compromise the chamber interior.Satin stainless-steel construction provides a durable wipe-clean exposed surface.
Типичные приложения
Personnel air shower walls and ceilingsMaterial air shower chambersCleanroom pass-through air showersReplacement nozzle upgrades and refurbishment
Технические параметры
Typical construction and dimensional ranges for adjustable air shower jet nozzles are shown below.
| Основной материал | 304 stainless-steel flange, spherical eyeball and discharge tube |
|---|---|
| Толщина панели | 20-100 mm compatible air-shower wall or ceiling assembly |
| эффективная ширина | 60-120 mm nominal mounting-flange diameter |
| Максимальная длина | Up to 110 mm overall nozzle depth |
| Толщина линий стали | 1.0-2.0 mm nominal formed or machined stainless-steel section |
| Плотность ядра | 7900-8000 kg/m³ for stainless-steel components |
| Теплопроводимость | 14-16 Вт/(м · К) для аустенитной нержавеющей стали |
| Поверхностная отделка | Fine satin-brushed natural stainless steel with smooth outlet bore |
| Объединенный тип | Adjustable spherical eyeball retained in a four-hole circular mounting flange |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Alternative flange diametersMatched outlet bore sizesCustom mounting-hole pitch304 or 316 stainless-steel construction
Planning a Air Shower Nozzle specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
