STJH-SEPARATOR-HEPA-H14-610X610X290-HC

Separator HEPA Filter 610 × 610 × 290 mm High-Capacity H14

A full-square H14 separator filter with expanded media area for 3398 m3/h final-air duty.

22.61 m² high-capacity pack
3398 m3/h rated airflow
H14 full-depth construction

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This 610 × 610 × 290 mm H14 filter uses a high-capacity separator pack with 22.61 m² of media area, increased from the referenced 15.24 m² standard arrangement. It is rated for 3398 m3/h at a 350 Pa initial resistance. The larger internal pack is intended for high-airflow biopharmaceutical and clean-process final filtration where a full-depth housing is available.

Ciri-ciri Utama

Expanded internal media area

Additional pleated surface supports a higher airflow through the standard 610 mm square face.

Published high-capacity duty

The model provides a defined 3398 m3/h selection point at 350 Pa clean resistance.

Traditional separated stability

Rigid separators maintain uniform passages through the deep H14 media pack.

Parameter teknikal

Overall Dimensions	610 × 610 × 290 mm
Efficiency Grade	H14
High-Capacity Media Area	22.61 m²
Referenced Standard Media Area	15.24 m²
Rated Airflow	3398 m3/h
Initial Resistance	350 Pa
Filter Pack	Full-depth separator pleat pack
Face Module	610 mm square
System Duty	High-flow final filtration
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Applications

Suitable for high-air-change biopharmaceutical suites, clean-process AHUs and final filter banks that must move substantial air through each 610 mm opening. The selection requires a fan and housing designed for the documented 350 Pa clean starting point and subsequent loading.

Solutions for Your Application

A standard media pack cannot deliver enough air through the available HEPA bank area.The 22.61 m² high-capacity pack raises rated airflow to 3398 m3/h within the full-module envelope.

The high airflow is specified without accounting for clean and loaded resistance.Use 350 Pa as the initial design point and retain additional fan pressure for the approved change-out condition.

Pilihan yang boleh didapati

Confirm frame material, gasket side, faceguards, high-capacity pack selection and compatible bank clamping pressure.

Planning a Separator HEPA Filter 610 × 610 × 290 mm High-Capacity H14 specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami