STJH-HIGH-TEMP-HEPA-H14-120C

High-Temperature HEPA Filter 120 C High-Airflow H14

A stainless H14 V-bank for warm high-volume process air up to 120 C continuous operation.

120 C continuous duty
High-airflow V-bank
Stainless frame with EPDM gasket

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This warm-process HEPA uses banked glass media with hot-melt separation inside a stainless steel frame. An EPDM gasket and material set support continuous operation up to 120 C, while a full-module selection can serve approximately 3400-4000 m3/h. It is the high-airflow choice for moderately hot duty and is structurally different from the separator-style 260 C and ceramic 350 C models.

Ciri-ciri Utama

Warm-process airflow capacity

The V-bank layout provides high volume flow for ovens or process systems that remain within the 120 C envelope.

Temperature-matched construction

Stainless casing, EPDM sealing and hot-melt-separated glass packs are selected as a complete warm-air assembly.

Compact bank geometry

Multiple V-shaped packs place substantial media area inside a deep but manageable AHU element.

Parameter teknikal

Filter Efficiency	H14
Maximum Continuous Temperature	120 C
Nominal Full-Module Airflow	About 3400-4000 m3/h
Frame Material	Stainless steel
Media	High-efficiency glass fiber
Pleat Separation	High-temperature-compatible hot melt
Gasket	EPDM
Filter Configuration	Compact V-bank
Recommended Location	Warm clean-process supply or recirculation
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Applications

Used in warm clean industrial processes, sterilization support-air systems and high-volume supply or recirculation sections whose normal maximum is no more than 120 C. Temperature transients, gasket exposure and airflow at operating temperature should be reviewed together.

Solutions for Your Application

A standard room-temperature V-bank degrades in continuously warm process air.Use the stainless, EPDM-gasketed 120 C construction when the full operating cycle stays within that limit.

The plant selects a 260 C separator filter even though it needs much higher airflow at moderate heat.The V-bank design is optimized for high-volume duty in the lower 120 C temperature class.

Pilihan yang boleh didapati

Confirm actual temperature cycle, full-module airflow, gasket exposure, casing dimensions and hot-side installation orientation.

Planning a High-Temperature HEPA Filter 120 C High-Airflow H14 specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami