STjh 610 mm U15 gel-seal ULPA filter main product view

STJH-GEL-SEAL-ULPA-U15-610

Gel-Seal ULPA Filter 610 mm U15

A full 610 mm-class U15 terminal panel whose factory gel trough engages a compatible bottom-load housing blade.

610 mm full module
U15 ULPA efficiency
Integral gel trough

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This full-module U15 panel is organized around a factory-filled gel trough rather than a dry face gasket. The continuous fluid seal suits room-side bottom-load terminals where a housing knife edge enters the gel around the complete perimeter. U15 provides the lowest pressure burden among the three 610 mm gel-seal grades, making it appropriate when the contamination plan does not require U16 or U17.

Ciri-ciri Utama

Room-side seal access

The gel channel can be inspected and serviced from below in terminals designed for bottom-load filter replacement.

Full-module coverage

A 610 mm-class face provides efficient ceiling coverage without combining multiple small panels in one grid opening.

Lower ULPA pressure tier

U15 supports stringent particle control while avoiding the additional resistance associated with the higher acceptance grades.

Parameter teknikal

Nominal Face Size	About 610 x 610 mm
Efficiency Class	U15
Minimum Efficiency	99.9995% at MPPS
Media Options	Microglass or ePTFE according to process need
Frame Material	Anodized aluminum
Seal Type	Factory-filled integral gel trough
Mating Interface	Terminal-housing knife edge
Loading Direction	Room-side bottom load
Primary Position	Cleanroom terminal ceiling
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Applications

Used above semiconductor rooms, precision assembly areas and clean mini-environments that employ gel-seal terminal housings. It is selected when U15 fulfills the airborne-particle requirement and straightforward room-side changeout is preferred.

Solutions for Your Application

A nominal 610 mm filter does not align with the terminal blade or clamp points.Check actual external dimensions, gel-trough offset and knife-edge reach against the housing drawing before release.

Gel surface damage creates an uncertain seal after a routine filter change.Protect the trough until installation, lower the panel evenly onto the blade and inspect the complete engagement line before testing.

Pilihan yang boleh didapati

Confirm exact full-module face size, overall depth, media type, gel formulation and location, guards and room-side retention hardware.

Planning a Gel-Seal ULPA Filter 610 mm U15 specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami