STjh compact 356 mm continuous liner discharge system with folded film

STJH-CONTINUOUS-LINER-DISCHARGE-SYSTEM-356X9M

Continuous Liner Discharge System 356 mm × 9 m

A compact 356 mm lay-flat continuous liner supplied in a 9.1 m length for contained bag-out from small process outlets.

356 mm lay-flat width
9.1 m supplied length
Compact bag-out interface

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This 14-inch liner format is sized for compact isolators and enclosures where a 23-inch tube would add unnecessary bulk around the discharge point. The continuous sleeve stores on the outlet canister, allowing an operator to form successive sealed packages while keeping the receiving container outside the contaminated zone.

Ciri-ciri Utama

Small-outlet fit

The narrower sleeve suits tools, vials, tablets and waste that do not require a drum-diameter opening.

Successive sealed packs

Operators can advance, close and cut the liner between removals instead of opening the process enclosure for each bag-out.

Short-run inventory control

A 9.1 m roll limits unused film at equipment that is serviced intermittently or has little canister storage space.

Parameter teknikal

Nominal Liner Width	356 mm lay-flat (14 in)
Supplied Length	9.1 m (30 ft)
Film Type	Multilayer pharmaceutical containment film
Compliance Basis	FDA- and EU-compliant film grades available
Typical Outlet Canister	203 or 305 mm (8 or 12 in), with transition as required
Discharge Method	Continuous sleeve advanced for repeated sealed bag-out
Closure Method	Compatible crimp or band-clamp closure system
Handled Items	Small parts, tablets, vials, tools or contained waste
Containment Basis	Application-specific; comparable systems are documented below 1 µg/m³
Penyesuaian	Film grade, outlet transition and closure accessories can be configured for the intended material and operating environment.

Applications

Contained removal of small components, oral-solid doses, sampling items and disposable waste from compact pharmaceutical isolators or flexible enclosures.

Solutions for Your Application

A full-size liner crowds a small outlet and obstructs access around the enclosure.Use the 356 mm lay-flat format with a correctly sized transition to keep the stored sleeve proportional to the discharge point.

Infrequent bag-out leaves excessive film loaded on rarely used equipment.Specify the 9.1 m roll so film inventory and canister loading match a short or intermittent campaign.

Pilihan yang boleh didapati

ArmorFlex film grade, antistatic construction, 203 or 305 mm canister transition, multi-O-ring canister, crimps, band clamps and removal tools may be selected.

Planning a Continuous Liner Discharge System 356 mm × 9 m specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami