STjh large 750 mm BSL-3 containment pass box with reinforced painted enclosure, stainless floor and multiple compression latches

STJH-BIOSAFETY-CONTAINMENT-PASS-BOX-750

Biosafety Containment Pass Box 750 mm

The largest high-airtight family size for closed bins, bulky containers and equipment that cannot pass through smaller BSL-3 hatches.

750 mm cubic maximum family size
90 kg structural load
Full stainless construction available

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

A 750 mm cubic transfer space and 935 x 830 x 840 mm external envelope make this the largest published chamber in the family. The 90 kg cabinet retains electromagnetic door control and the same sealed gasket, handle and control-box architecture as the smaller versions. It is appropriate when load clearance is more important than minimizing the wall cut-out or supporting structure.

Ciri-ciri Utama

Bulky-container clearance

The 750 mm opening accepts larger closed vessels and material bins that would need repacking for the 500 or 600 mm chambers.

Containment-oriented sealing

Gasketed doors and sealed operating hardware preserve the high-airtight architecture across the larger face area.

Cleanability upgrade path

A complete stainless-steel body can be selected when the cleaning regime extends beyond the standard stainless transfer floor.

Parameter teknikal

Internal Dimensions	750 W x 750 D x 750 H mm
External Dimensions	935 W x 830 D x 840 H mm
Approximate Weight	90 kg
Electrical Supply	100 V AC, single phase, 50/60 Hz
Connected Load	Approximately 30 VA
Door Interlock	Electromagnetic
Standard Body	Baked-painted steel with SUS304 hairline floor
Stainless Option	Full stainless-steel body and interior available
Containment Seals	Silicone door gasket with sealed handle and control box
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Applications

For bulky sealed waste packs, larger culture vessels, transport bins and equipment cases crossing BSL-3 research or bioprocess boundaries. The wall opening, 90 kg dead load, lifting route and door swing clearances should be checked together before this large model is chosen.

Solutions for Your Application

Large rigid containers cannot be angled through a 600 mm chamber without contacting the door seal.Use the 750 mm clear cube to preserve loading clearance around both the vessel and the silicone gasket.

The heavier cabinet may exceed the support assumed for a conventional wall hatch.Account for the 90 kg unit weight and transferred payload with a dedicated support stand or engineered wall framing.

Pilihan yang boleh didapati

Configure full stainless construction, support stand, wall flanges and germicidal lighting. Provide the maximum loaded weight, container dimensions and surface-decontamination procedure when defining the final chamber.

Planning a Biosafety Containment Pass Box 750 mm specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami