Complete powder-coated steel cleanroom door with flush frame and vision panel

Pintu Bilik Bersih, Windows dan Sistem Interlock

Pintu Bilik Bersih Keluli Bersalut Serbuk

A robust 50 mm flush doorset with powder-coated galvanized steel facings, a sealed perimeter and a lightweight honeycomb core for routine personnel and material access.

50 mm Flush Steel Leaf
Durable Powder-Coated Face
Automatic Bottom Seal Option
Flush Vision Panel Available

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Powder-Coated Steel Cleanroom Door uses folded galvanized steel skins bonded around an aluminum honeycomb core and closed by a matching steel or aluminum frame. Smooth faces, sealed leaf edges and clean-profile hardware reduce ledges around the opening. The construction gives busy production routes better dent resistance than lightweight decorative doors while remaining easier to operate than a solid metal leaf.

Ciri-ciri Utama

Powder-coated galvanized facings tolerate frequent wiping and everyday trolley contact.

Bonded honeycomb stabilizes the broad leaf without excessive operating weight.

Flush frame geometry integrates with modular wall panels or prepared solid-wall openings.

A concealed drop seal can close the floor gap only when the leaf reaches the frame.

Vision panels, interlock magnets and access-control hardware can be factory prepared.

Penyelesaian untuk permohonan anda

Steel cleanroom door buyers need a practical balance of impact resistance, easy cleaning, manageable leaf weight and reliable sealing.

Thin decorative door skins dent and flex after repeated cart contact.Formed galvanized steel facings and bonded honeycomb distribute local impact across the leaf.

Deep beads and exposed screws collect residue around the doorway.Flush glazing trims and concealed frame fixings preserve a smooth wipeable room face.

A fixed floor sweep drags, sheds particles and increases opening effort.An automatic drop seal remains raised during movement and lowers only in the closed position.

Retrofitted locks and interlock magnets leave rough site-cut openings.Factory hardware reinforcement and prepared cable routes keep functional equipment integrated.

Permohonan yang biasa

Pharmaceutical production corridorsMedical-device assembly roomsElectronics clean manufacturingClean packaging areasControlled laboratory entrances

Parameter teknikal

Typical construction values for a powder-coated steel cleanroom personnel door are shown below.

Bahan Teras	Bonded aluminum honeycomb
Ketebalan Panel	50 mm door leaf
Lebar berkesan	700-1200 mm single-leaf clear opening
Panjang maksimum	2400 mm maximum leaf height
Keluli Menghadapi Ketebalan	0.8-1.0 mm galvanized steel leaf skins
Ketumpatan teras	40-70 kg/m³ aluminum honeycomb
Kekonduksian Terma	0.06-0.10 W/(m·K) typical honeycomb core range
Kemasan permukaan	Smooth polyester powder coating in cleanroom white or selected RAL colour
Jenis Bersatu	Flush rebated frame with compressible perimeter gasket and optional automatic drop seal
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

Double-glazed flush vision panelStainless steel kick plateDoor closer and panic hardwareInterlock or access-control preparation

Planning a Powder-Coated Steel Cleanroom Door specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami