Pass-through autoclave load-side main view

Pembersihan bilik bersih, pembasmian kuman dan pensterilan

Autoclave Melalui

Pensteril wap berpenghadang pintu berganda yang memindahkan muatan tahan haba dan lembapan antara zon bilik bersih yang berasingan sambil mengekalkan aliran kerja yang terkawal.

Opposed interlocked doors support one-way material transfer
Pengedapan dinding penghalang membantu mengasingkan persekitaran pemuatan dan pembongkaran.
Kitaran vakum-wap yang boleh diprogramkan menyediakan pemprosesan yang dipantau.

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This pass-through autoclave is designed for pharmaceutical facilities, laboratories, and sterile-processing layouts requiring a defined dirty-to-clean workflow. Automatic vertical sliding or hinged doors reduce handling effort, while recipe controls coordinate conditioning, exposure, exhaust, and drying. Chamber dimensions, utilities, barrier trim, and unloading-side controls are adapted to the facility layout.

Ciri-ciri Utama

Ruang tekanan melalui pintu dua pintu

Mechanical and control-system door interlocks

Rangka penghadang keluli tahan karat dan perapi dinding tertutup

Pre-vacuum, gravity, leak-test, and drying programs

Skrin sentuh beban dan panel status sampingan

Pencatatan data kitaran dan sejarah amaran

Automatic sliding-door option

Memuatkan kereta sorong dan troli pemindahan

Penyelesaian untuk permohonan anda

Material transfer between cleanliness zones can undermine segregation if door logic, wall sealing, load flow, or cycle status is ambiguous. The system must also remove air reliably and prevent clean-side access to an incomplete or faulted load.

How is cross-zone access controlled?Independent door interlocks permit only the appropriate door to open according to cycle status and configured workflow.

How is the wall penetration sealed?A stainless barrier frame and custom trim interface with the partition to form a cleanable perimeter seal.

Can both sides see cycle status?The load side provides full control, while the unload side can display locked, cycle-complete, alarm, and door-ready states.

How are loads moved safely?Matched chamber racks, loading carts, and transfer trolleys support ergonomic and repeatable loading.

Permohonan yang biasa

Pharmaceutical component transferSterile manufacturing supportCleanroom garment processingLaboratory containment workflowsHealthcare sterile-processing departmentsBiotechnology production facilities

Parameter teknikal

The pass-through autoclave integrates a jacketed stainless pressure vessel across a sealed partition. Independent load- and unload-side doors are interlocked so the clean-side door remains closed until a successful cycle is complete. Both sides receive appropriate status indication and operator controls.

Bahan Teras	316L or 304 stainless-steel pressure chamber and barrier frame
Ketebalan Panel	40–80 mm insulated barrier cabinet panels
Lebar berkesan	700–1200 mm equipment width
Panjang maksimum	1600–3000 mm maximum external depth or height
Keluli Menghadapi Ketebalan	Lapisan keluli tahan karat 1.0-1.5mm
Ketumpatan teras	60-100 kg/m³ penebat mineral suhu tinggi
Kekonduksian Terma	0.035-0.050 W/(m · K)
Kemasan permukaan	Brushed external stainless steel with polished chamber and flush barrier trim
Jenis Bersatu	Welded chamber seams with gasketed interlocked doors and sealed barrier-wall flange
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Hinged or vertical sliding doorsChamber sizes and loading systemsPenjana bersih-wap pentingClean-side status display or touchscreenPrinter, USB, and network recordsBioseal or flush barrier trimAutomated loading interface

Merancang spesifikasi bagi autoklaf laluan terus?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami