Englisch
Portugiesisch
Spanisch
Malaiisch
indonesisch
DeutschCurrent
Türkischer Sprache
Vietnamesisch
Französisch
Russisch
Arabisch
Thailändisch
Japanisch
Koreanisch
Reinraum Beleuchtung und elektrische Ausrüstung
Teardrop Cleanroom Licht
A narrow suspended LED luminaire whose tapered cross-section reduces disturbance beneath laminar-flow ceiling filters.
- Aerodynamic Teardrop Profile
- Laminar-Flow Friendly
- Sealed Extruded Body
- Continuous Linear Optic
Produkteinführung
This luminaire hangs between filter modules on slim suspension points and places its light engine inside a smooth tapered aluminum extrusion. The rounded leading edge and narrow lower profile allow downward air to pass around the fixture with less wake than a rectangular housing. A continuous snap-in diffuser closes the light channel, while end caps and cable entries are gasketed to keep the body smooth and cleanable.
Key Features
A continuous diffuser eliminates repeated lens joints along the illuminated run.
Slim stainless suspension stems keep the fixture aligned between filter banks.
Sealed end caps protect the LED boards and driver wiring.
The matte white housing reflects room light without mirror-like glare.
Lösungen für Ihre Anwendung
Lighting installed below a laminar ceiling must provide useful illumination without creating a large wake or hard-to-clean top ledge.
Box-shaped fittings block downward air and create turbulent shadows.A streamlined teardrop section divides and rejoins the airflow around a narrow body.
Multiple small fixtures add many suspension and cleaning points.Long continuous runs reduce the number of bodies and end joints.
Open lens channels capture dust above the work zone.A sealed diffuser and gasketed end caps close the optical compartment.
Uneven hanging height disrupts both airflow and visual alignment.Adjustable paired suspension stems level each linear section precisely.
Typische Anwendungen
Unidirectional airflow roomsAseptic processing suitesLaminar-flow filling linesSterile compounding ceilings
Technische Parameter
Typical configurable construction ranges for a teardrop cleanroom LED luminaire are listed below.
| Core Material | Extruded aluminum teardrop housing with LED boards, internal driver channel and opal polycarbonate lens |
|---|---|
| Panel Dicke | 80-140 mm overall tapered body height |
| Effektive Breite | 70-130 mm maximum body width |
| Maximale Länge | Up to 3000 mm per continuous luminaire section |
| Stahl facing Dicke | 1.0-1.5 mm stainless suspension stems and formed end hardware |
| Kerndichte | Approximately 2700 kg/m³ for the aluminum housing |
| Thermische Leitfähigkeit | 160-205 W/(m·K) for the aluminum extrusion |
| Oberfläche Finish | Antimicrobial-compatible matte white powder coat with smooth opal lower diffuser |
| Gemeinsamer Typ | Gasketed end caps, sealed cable entry and continuous snap-fit diffuser channel |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Single sections or linked continuous rowsDirect-only or direct/indirect lightRemote emergency batteryAdjustable stainless suspension kit
Planning a Teardrop Cleanroom Light specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
