STjh large 700 mm negative-pressure containment pass box with coved SUS304 chamber and multiple compression latches

STJH-NEGATIVE-PRESSURE-CONTAINMENT-PASS-BOX-700

Negative-Pressure Containment Pass Box 700 mm

The largest listed negative-pressure cube, combining bulky-load clearance with a coved stainless interior for easier residue removal.

700 mm maximum listed cube
Four-side coved interior
Large contained-load access

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

A 700 x 700 x 700 mm work zone gives this model the highest volume in the listed negative-pressure range. The 860 x 700 x 790 mm shell is fabricated from 1.2 mm SUS304 and uses a mechanically interlocked two-door arrangement. Four-side coved interior transitions distinguish it from smaller square chambers when wipe-down access around bulky waste packs or vessels is a priority.

Key Features

Large-load containment

The 700 mm clear work zone accommodates wider closed bins and vessels without forcing them against the door frame.

Coved cleaning transitions

Rounded four-side interior junctions reduce sharp corners where residue can be difficult to reach.

Passive door interlock

Mechanical sequencing keeps the opposite door closed during loading without adding electronic release controls.

Technische Parameter

Work Zone	700 W x 700 D x 700 H mm
External Dimensions	860 W x 700 D x 790 H mm
Body Material	1.2 mm SUS304 stainless steel
Containment Mode	Negative pressure
Airflow Direction	Clean room toward contaminated room
Door Interlock	Mechanical
Interior Corners	Coved on four sides
Access	Opposed manually operated doors
Typical Load	Bulky closed vessels, waste packs or material bins
Customisierung	Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung.

Applications

For larger closed vessels, waste packs and material bins leaving pharmaceutical containment areas, hospital isolation support rooms or research laboratories. The heavy transferred load, loading height and turning clearance outside both doors should be checked rather than selecting this size on chamber volume alone.

Solutions for Your Application

Bulky waste packs can snag at a small opening and spread residue onto the door gasket.The 700 mm cube provides more perimeter clearance around the package during loading and retrieval.

Square internal corners are slow to wipe after a spill in a large chamber.Use the four-side coved interior to improve access along the chamber junctions and simplify visual inspection.

Verfügbare Optionen

Define exhaust and monitoring interfaces, door windows, wall trim, transfer height and any removable loading tray. Confirm the maximum package mass and chemical resistance required for the actual decontamination method.

Planning a Negative-Pressure Containment Pass Box 700 mm specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team