STJH-GASKET-SEAL-HEPA-H14-292

Gasket-Seal HEPA Filter 292 mm H14 Seamless

A deep H14 V-bank element for high airflow through gasket-clamped final-filter housings.

292 mm V-bank depth
H14 high-capacity duty
Poured urethane gasket

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

Unlike the shallow ceiling panels in this gasket series, this model uses multiple mini-pleat packs arranged in a 292 mm-deep V-bank enclosure. The increased media area supports airflow up to about 2400 cfm while a one-piece poured polyurethane gasket provides a dry compression interface to the holding frame. It is intended for deep AHU cells, not low-profile room-side terminals.

Key Features

High airflow from one face

The V-bank geometry places more media behind the same housing opening for high-volume final filtration.

Dry seamless sealing

A poured gasket provides continuous contact without the servicing considerations of a fluid gel channel.

Rigid deep enclosure

An anodized aluminum box supports the banked packs for removal from full-depth air-handler tracks.

Technische Parameter

Media Type	Microglass mini-pleat packs
Efficiency Selection	H14 / 99.99% or better at 0.3 micron
Filter Depth	292 mm
Rated Airflow	Up to about 2400 cfm
Pack Arrangement	Deep V-bank
Enclosure Material	Anodized aluminum
Seal Configuration	Seamless poured polyurethane gasket
Housing Type	Full-depth gasket-clamp AHU cell
Service Access	Upstream or side withdrawal as housing permits
Customisierung	Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung.

Applications

Specified for medical, pharmaceutical and clean-process air handlers that need H14 final filtration at substantially higher airflow than a flat panel can provide. The AHU must offer the full 292 mm depth, adequate access for withdrawal and a flat clamping surface matched to the gasket face.

Solutions for Your Application

A flat HEPA panel would require too many parallel openings for the design airflow.The V-bank pack expands media area behind one face and is selectable up to about 2400 cfm.

A deep replacement binds in a housing designed for a different gasket location.Check actual casing depth, airflow direction, gasket face and fastener reach before ordering the 292 mm element.

Verfügbare Optionen

Define face size, airflow selection, gasket face, gasket profile, removal direction and protective screen arrangement for the AHU cell.

Planning a Gasket-Seal HEPA Filter 292 mm H14 Seamless specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team