Englisch
Portugiesisch
Spanisch
Malaiisch
indonesisch
DeutschCurrent
Türkischer Sprache
Vietnamesisch
Französisch
Russisch
Arabisch
Thailändisch
Japanisch
Koreanisch
Reinraum-Test - und Validierungsinstrumente
Duct Leakage Tester
A portable positive/negative duct leakage tester with variable blower, calibrated flow measurement and automatic pressure control for HVAC commissioning.
- Controlled positive and negative duct pressurization.
- Calibrated leakage-flow measurement.
- Portable integrated field test system.
Produkteinführung
This self-contained tester connects to an isolated duct section, raises or lowers it to a defined pressure and measures the airflow required to hold that condition. A variable-speed blower, calibrated inlet and dual pressure channels allow the controller to calculate leakage rate during positive or negative tests. The wheeled enclosure and flexible test hose support field commissioning across large installations.
Key Features
Closed-loop control maintains the selected test pressure.
Calibrated inlet measurement quantifies stabilizing leakage airflow.
Dual pressure channels monitor duct pressure and flow element.
Guided controller calculates leakage rate and test duration.
Wheeled field enclosure organizes hose, cables and adapters.
Lösungen für Ihre Anwendung
Duct leakage must be quantified at a stable specified pressure even though the system response changes with seal quality, section size and test direction.
Test pressure drifts as leakage changes during the run.Closed-loop blower control continuously adjusts flow to maintain the selected pressure.
One-direction equipment cannot assess both supply and extract ductwork.A reversible flow arrangement supports positive and negative pressure tests.
Leakage calculations vary when technicians use separate instruments.Integrated pressure and calibrated-flow channels calculate leakage within one guided workflow.
Large test equipment is difficult to move through an active site.A compact wheeled enclosure and stored flexible hose simplify relocation between duct sections.
Typische Anwendungen
Cleanroom supply-duct leakage testingExhaust and return duct commissioningNew ductwork quality verificationPost-repair airtightness checksHVAC leakage-class documentation
Technische Parameter
Representative portable leakage-tester construction is shown below; blower capacity, calibrated flow range and hose size can be selected for the duct sections under test.
| Core Material | Variable-speed centrifugal blower, calibrated flow nozzle, pressure sensors and powder-coated steel enclosure |
|---|---|
| Panel Dicke | Typically 1.0-2.0 mm for the steel cabinet panels |
| Effektive Breite | Approximately 450-650 mm across the mobile enclosure |
| Maximale Länge | Approximately 700-1000 mm including wheeled cabinet and stored hose |
| Stahl facing Dicke | Typically 1.0-2.0 mm for powder-coated steel enclosure panels |
| Kerndichte | Approximately 7850 kg/m³ for structural steel components |
| Thermische Leitfähigkeit | Approximately 45-55 W/(m·K) for structural steel components |
| Oberfläche Finish | Safety-yellow powder-coated cabinet with graphite controls, black hose and stainless fittings |
| Gemeinsamer Typ | Cam-lock flexible duct connection with sealed calibrated inlet and barbed pressure taps |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Low- or high-flow configurationPositive/negative test modeMultiple calibrated flow nozzlesFlexible connection hose sizesReport download and printingTransportschutzdeckung
Planning a Duct Leakage Tester specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
