Englisch
Portugiesisch
Spanisch
Malaiisch
indonesisch
DeutschCurrent
Türkischer Sprache
Vietnamesisch
Französisch
Russisch
Arabisch
Thailändisch
Japanisch
Koreanisch
Cleanroom Installation Zubehör
Reinraum-Schutz - Schienen
A low-profile hygienic wall guard with a replaceable light-gray PVC-u cover, continuous aluminum retainer and color-matched end caps for cleanroom traffic zones.
- 100 mm Impact Face
- Continuous Aluminum Retainer
- Six-Point Mounting Pattern
- Austauschbare PVC-U-Abdeckung
Produkteinführung
The cleanroom protection rail uses a gently curved rigid PVC-u cover clipped over a continuous 6063-T5 aluminum retainer. Its 100 mm face presents a broad contact surface at trolley and cart height without resembling a handrail or projecting tube. Six countersunk holes distribute the retainer fixings along a standard section, while one close-fitting molded cap finishes each cut end and closes the exposed profile edges.
Key Features
A 2.0 mm impact-modified PVC-u skin snaps onto the concealed metal support and can be replaced without removing the full retainer.
Der durchgehende 2,0-mm-Aluminiumrücken hält das lange Schienen profil ausgerichtet und unterstützt die Last übertragung zwischen Befestigungs punkten.
Sechs versenkte Montage positionen bieten eine vorhersehbare Befestigungs anordnung entlang eines 3660-mm-Abschnitts.
Farb angepasste geformte Kappen schließen beide Schienen enden mit glatten Übergängen, die zum Abwischen zugänglich bleiben.
Lösungen für Ihre Anwendung
Der Verkehr auf Geräte-und Wagen höhe kann modulare Wanda us statt ungen markieren, lokale Reparaturen lockern und Leisten schaffen, die schwer zu reinigen sind.
Wiederholter Wagen kontakt kann eine Reinraum platte haut auf gleicher Betriebs höhe eindellen lassen.The wide curved PVC-u face and continuous aluminum backing spread contact along the rail before it reaches the finished wall.
Open profile ends and projecting hardware create dirt traps along a frequently cleaned corridor.Close-fitting molded caps and a snap-on cover conceal cut edges and fasteners behind smooth accessible surfaces.
Replacing a permanently bonded guard after visible abrasion can disrupt an operating controlled area.The replaceable cover separates routine cosmetic renewal from the retained wall-mounted aluminum support.
A long guard fixed at irregular points can bow or follow an uneven line across modular panels.The rigid continuous retainer and defined six-hole layout support level positioning and consistent fastening along the section.
Typische Anwendungen
Cleanroom corridors exposed to material-cart trafficPharmaceutical production and laboratory circulation routesControlled equipment staging and service zonesHygienic food and medical-device processing corridorsWall protection beside pass-through and transfer areas
Technische Parameter
Typical construction and dimensional values for a light-gray PVC-u cleanroom wall protection rail are listed below.
| Core Material | Impact-modified rigid PVC-u snap-on cover over a continuous 6063-T5 aluminum retainer with molded PVC-u end caps |
|---|---|
| Panel Dicke | Approximately 29 mm overall rail projection from the finished wall |
| Effektive Breite | 100 mm nominal protective face height |
| Maximale Länge | Up to 3660 mm per continuous rail section |
| Stahl facing Dicke | No steel facing; 2.0 mm nominal PVC-u cover and 2.0 mm aluminum retainer |
| Kerndichte | Approximately 2700 kg/m³ for the 6063 aluminum retainer |
| Thermische Leitfähigkeit | Approximately 190 W/(m·K) for 6063 aluminum at 20°C |
| Oberfläche Finish | Through-colored fine-textured light-neutral-gray PVC-u with a mill-finish satin-silver aluminum retainer |
| Gemeinsamer Typ | Snap-fit PVC-u cover on a continuous predrilled retainer with two fitted end caps and six countersunk wall fixings per 3660 mm section |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Alternative through-colored neutral PVC-u cover colorsFactory-cut rail lengths for the required wall runMatching left and right end caps, outside corners and inside cornersSubstrate-compatible anchors for modular panels, masonry or reinforced backingOptional spacer pads where additional wall clearance is required
Planning a Cleanroom Protection Rail specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
