Englisch
Portugiesisch
Spanisch
Malaiisch
indonesisch
DeutschCurrent
Türkischer Sprache
Vietnamesisch
Französisch
Russisch
Arabisch
Thailändisch
Japanisch
Koreanisch
Reinraumreinigung, Desinfektion und Sterilisation
Cleanroom Waschmaschine
A hygienic barrier washing machine that transfers reusable cleanroom garments from a soiled loading area to a separated clean-side unloading area.
- Opposed loading and unloading doors protect zone separation
- Programmable wash profiles support technical garment care
- Flush stainless fascia simplifies clean-side housekeeping
Produkteinführung
The cleanroom garment washer is a pass-through barrier unit for controlled laundering of coveralls, hoods, overshoes, and compatible textile accessories. Stainless process surfaces, opposed interlocked doors, automatic dosing connections, and configurable recipes support a documented laundry flow. Final cycle selection remains dependent on the garment supplier's care limits and the site's contamination-control procedure.
Key Features
Interlock prevents both drum doors opening together
Stainless-steel drum and clean-side fascia
Programmable wash, rinse, and extraction stages
Controlled detergent and additive dosing connections
Adjustable drum speed and reversing action
High-extraction configuration to reduce retained moisture
Partition seal interface for hygienic installation
Lösungen für Ihre Anwendung
Reusable cleanroom garments must be washed without uncontrolled contact between used and processed loads. Aggressive mechanical action, residual chemistry, and an unsuitable final rinse can shorten garment life or leave particles and extractables.
How is clean and soiled laundry kept apart?Opposed doors, a sealed partition interface, and door interlocking enforce a one-way transfer through the washer.
Can cycles protect technical fabrics?Programmable drum action, temperature, water level, extraction speed, and dosing allow recipes to follow garment care requirements.
How are detergent residues controlled?Metered dosing and configurable intermediate and final rinses allow chemistry removal targets to be built into the cycle.
Is the machine practical to clean?Flush stainless panels, accessible seals, drainable wetted surfaces, and service access outside the critical unload face support housekeeping.
Typische Anwendungen
Pharmaceutical cleanroom laundriesSemiconductor garment processingMedical-device manufacturing facilitiesBiotechnology controlled areasElectronics cleanroom supportHospital sterile-service laundries
Technische Parameter
A horizontal perforated drum is accessed through interlocked doors on opposite sides of the machine. The washer can be sealed into a partition so incoming garments and washed garments follow a one-way route. Programmable water levels, temperature, drum action, dosing, extraction, and rinsing allow cycles to be matched to garment construction.
| Core Material | Stainless-steel drum and wetted components with reinforced steel frame |
|---|---|
| Panel Dicke | 30–50 mm insulated enclosure panels |
| Effektive Breite | 700–1200 mm drum and loading-face width |
| Maximale Länge | 1200–2000 mm overall machine depth |
| Stahl facing Dicke | 1,0-2,0mm Edelstahl-Verkleidung |
| Kerndichte | 40-60 kg/m³ akustische und thermische Isolierung, wo montiert |
| Thermische Leitfähigkeit | 0.035–0.045 W/(m·K) for insulated enclosure sections |
| Oberfläche Finish | Brushed stainless clean-side fascia with smooth cleanable drum surfaces |
| Gemeinsamer Typ | Gasketed barrier flange, interlocked drum doors, welded wetted seams, and sanitary utility connections |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
20–70 kg nominal dry-load capacitiesSteam or electric heatingAutomatic liquid chemical dosingPurified-water final rinseConductivity-monitored rinse endpointClean-side status displayData logging and batch reportsCustom partition trim and sealing kit
Planning a Cleanroom Garment Washer specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
